• Japanese
  • Korean
  • Chinese
Cover Image

Global Markets for Plastics Additives -- Focus on Europe

Abstract

REPORT HIGHLIGHTS

The total market for plastics additives is projected to increase from $39.6 billion in 2011, to $41.3 billion in 2012, to more than $43.1 billion in 2013, and to nearly $54.7 billion in 2018 yielding a compound annual growth rate (CAGR) of 4.9% for a period of five years, from 2013 to 2018.

The market for plastics additives in Europe was valued at $7.7 billion in 2010 and increased to $8.0 billion in 2011. The market is expected to increase from $8.7 billion in 2013 to $10.7 billion in 2018, at a CAGR of 4.3%.

The European market for plasticizers was valued at $2.4 billion in 2010 and increased to $2.5 billion in 2011. The market is expected to increase from $2.7 billion in 2013 to $3.5 billion in 2018, at a CAGR of 4.7%.

image1

REPORT SCOPE

INTRODUCTION

Many products are made from plastics (e.g., protective packaging, components in cars and aircraft, insulating materials, toys, mobile phones, buildings, medical devices, profiles and pipes). Plastics improve safety, save energy and can help protect the environment. Plastics are an essential part of modern-day life, and some activities depend completely on plastics and plastic products. Plastics and plastic products are made by mixing essential polymers with additives. Additives make plastics safer, cleaner, tougher and more colorful, and in some cases, plastics will not function without them. Additives increase the cost of producing plastics; however, they help conserve precious, raw material reserves. Without the additives that turn basic polymers into useful plastics and plastic products, their use would be a lot more expensive.

The market success of polymers, such as polyvinyl chloride (PVC) or polypropylene (PP) depends not only on the basic polymer but also on the additives that make the plastics as useful as they are. Their usefulness is largely attributed to the polymers used to make them and not to the additives used. Yet, when concerns arise regarding human health and the environment, plastics additives are often found to be responsible, and the industry is required to replace the additive or prove that it is indeed harmless.

STUDY GOALS AND OBJECTIVES

The goal of this market research study is to identify and measure the market opportunities for the full range of plastics additives. The global additives market is broken down and measured by various parameters, and future growth is forecast for both the overall market and every possible market segment. Regional markets are also measured and examined in detail.

REASONS FOR DOING THE STUDY

This report helps identify various growth opportunities in the field of plastics additives. The report also can help those in involved in the production and sale of additive and plastics products take full advantage of current and future opportunities.

SCOPE OF REPORT

The report has been prepared and presented in a simple, easy to understand format with a number of tables and charts/figures. A study of applications and global and regional markets for all types of the plastics additives and the plastics additives industry has been made in detail. The consolidation and globalization of the plastics processing industry has been studied in this report, so that additive manufacturers and suppliers can establish themselves in all the major regions.

The supply and pricing of raw materials and the basic feedstock of various plastics additives have been fluctuating greatly with the run-up in prices of raw materials and energy. This aspect of the plastics processing industry has also been studied and analyzed in detail in this report.

The environmental/regulatory aspects of different types of plastics additives continue to present concerns as well as opportunities to additive suppliers. The effects of these factors on the supply chain, value and demand for additives have also been studied in detail in this report.

INTENDED AUDIENCE

This report will be of help to those in the plastics additives industry responsible for the manufacture, distribution and supply of plastics additives:

  • Manufacturers, distributors and suppliers of additives.
  • Manufacturers of resins and specialty chemicals.
  • Manufacturers and suppliers of masterbatches.
  • Existing and new marketing personnel in the plastics additives business.
  • Advisors to the plastics processing and plastics additives industries.

INFORMATION SOURCES

Both primary and secondary research methods were used in this study. Primary information sources for this market research include individuals within companies, various research organizations, governmental agencies and trade associations. Additional secondary research sources include databases, trade literature, specialized journals and government statistics.

ANALYST CREDENTIALS

Srinivasa Rajaram, the analyst of this report, is a mechanical engineer with more than 40 years experience in designing factory layouts and setting up factories. He has set up factories for the production of weighing machines and dynamic balancing machines in India and has experience in the design, production and servicing of the above equipment. He was Senior Vice President of M/S Schenck Avery Ltd., an Indo-German joint venture, and set up the electronics department for manufacturing various types of electronic weighing and dynamic balancing equipment. He has authored several technology market research reports for BCC Research.

Table of Contents

Chapter- 1: INTRODUCTION - Complimentary

  • STUDY GOALS AND OBJECTIVES
  • REASONS FOR DOING THE STUDY
  • SCOPE OF REPORT
  • INTENDED AUDIENCE
  • INFORMATION SOURCES
  • ANALYST CREDENTIALS
  • RELATED REPORTS
  • BCC ONLINE SERVICES
  • DISCLAIMER

Chapter- 2: SUMMARY

  • Table Summary : GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Figure Summary : GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018

Chapter- 3: OVERVIEW

  • INDUSTRY CONCEPTS
  • IMPORTANCE OF THE INDUSTRY
  • LIFE CYCLE ASSESSMENT OF PLASTICS ADDITIVES
  • HISTORY OF PLASTICS AND PLASTICS ADDITIVES
  • DEVELOPMENT OF PLASTICS ADDITIVES
  • KEY MATERIAL TRENDS IN ADDITIVES
  • REGULATORY ISSUES
  • GOVERNMENT REGULATIONS

Chapter- 4: TECHNOLOGY

  • OVERVIEW OF PLASTICS AND ITS MANUFACTURE
  • OVERVIEW OF THE PLASTICS INDUSTRY
  • MAIN CLASSIFICATION OF PLASTICS
  • DIFFERENT TYPES OF PLASTICS
  • PLASTICS ADDITIVES
  • DESCRIPTIONS OF PLASTICS ADDITIVES
  • BIODEGRADABLE PLASTICS
  • APPLICATIONS OF PLASTICS ADDITIVES IN AUTOMOBILES
  • PLASTICS ADDITIVES IN OTHER TRANSPORTATION APPLICATIONS
  • PLASTICS IN PACKAGING
  • PLASTICS IN BUILDING AND CONSTRUCTION APPLICATIONS
  • PLASTICS IN ELECTRICAL AND ELECTRONICS APPLICATIONS
  • PLASTICS IN APPLIANCES
  • PLASTICS IN MEDICAL APPLICATIONS
  • PLASTICS IN MISCELLANEOUS APPLICATIONS
  • PATENT ANALYSIS

Chapter- 5: GLOBAL MARKETS FOR PLASTICS ADDITIVES BY TECHNOLOGY AND APPLICATION

  • IMPORTANCE OF PLASTICS AND THE PLASTICS INDUSTRY
  • GLOBAL PRODUCTION OF PLASTICS
  • GLOBAL MARKET FOR PLASTICS ADDITIVES
  • GLOBAL MARKET FOR APPLICATIONS OF PLASTICS ADDITIVES

Chapter- 6: EUROPEAN MARKET FOR PLASTICS ADDITIVES

  • OVERVIEW OF THE PLASTICS INDUSTRY IN EUROPE
  • EUROPEAN MARKET FOR PLASTICS ADDITIVES
  • EUROPEAN MARKET FOR LIGHT STABILIZERS
  • PLASTICS INDUSTRY IN EUROPE
  • MARKET FOR PLASTICS ADDITIVES IN EUROPEAN COUNTRIES
  • Table 74 : EUROPEAN PRODUCTION OF PLASTICS BY COUNTRY/REGION, THROUGH 2018
  • Figure 57 : EUROPEAN PRODUCTION OF PLASTICS BY COUNTRY/REGION, 2010-2018

Chapter- 7: INDUSTRY STRUCTURE AND COMPETITIVE ANALYSIS

  • FACTORS AFFECTING THE PLASTICS ADDITIVES INDUSTRY
  • MERGERS, ACQUISITIONS AND EXPANSION IN THE ADDITIVES INDUSTRY

Chapter- 8: APPENDIX A: U.S. PATENTS

  • Table 136 : LIST OF PATENTS COVERING PLASTICS ADDITIVES

Chapter- 9: APPENDIX B: MANUFACTURER/SUPPLIERS

  • Table 137 : MANUFACTURERS/SUPPLIERS OF PLASTICS ADDITIVES

Chapter- 10: APPENDIX C: PROFILES OF MAJOR PLASTICS ADDITIVES COMPANIES

  • ACCUREL SYSTEMS
  • AKCROS CHEMICALS LTD.
  • AKCROS CHEMICALS AMERICA
  • AKZONOBEL NV
  • ALBEMARLE CORP.
  • AMPACET CORP.
  • AMERIBROM INC.
  • ARKEMA INC.
  • AXEL PLASTICS RESEARCH LABORATORIES INC.
  • BAERLOCHER GMBH
  • BASF SE
  • B.I. CHEMICALS INC.
  • BYK-CHEMIE GMBH
  • CABOT CORP.
  • CAROLINA COLOR CORP.
  • CHEMSON POLYMER-ADDITIVE AG
  • CHEMTURA CORP.
  • CHEVRON PHILLIPS CHEMICAL CO.
  • CLARIANT AG
  • COLOR-CHEM INTERNATIONAL CORP.
  • CRODA INTERNATIONAL PLC
  • CYTEC INDUSTRIES INC.
  • DEAD SEA BROMINE GROUP (DSBG)
  • DOW CORNING CORP.
  • DUPONT CO.
  • DUPONT PERFORMANCE ELASTOMERS
  • EASTMAN CHEMICAL CO.
  • EMERSON & CUMING COMPOSITE MATERIALS INC.
  • ENDEX POLYMER ADDITIVES INC.
  • ENGELHARD CORP.
  • EVONIK INDUSTRIES AG
  • FERRO CORP.
  • HALSTAB DIVISION
  • HOLLIDAY PIGMENTS SA
  • HUBEI NANXING POLYMER ADDITIVES CO. LTD.
  • J.M. HUBER CORP.
  • HURON TECHNOLOGIES INC.
  • HYPERION CATALYSIS INTERNATIONAL
  • ISHIHARA SANGYO KAISHA LTD.
  • ISHIHARA CORP. (U.S.)
  • KENRICH PETROCHEMICALS INC.
  • KEYSTONE ANILINE CORP.
  • LANXESS AG
  • M.A. HANNA COLOR
  • MILLENNIUM INORGANIC CHEMICALS INC.
  • MILLIKEN CHEMICAL
  • OCCIDENTAL PETROLEUM CORP.
  • POLYONE CORP.
  • PRABHU POLY COLOR LTD.
  • SAUDI BASIC INDUSTRIES CORP. (SABIC)
  • SHANGHAI FURUIHE CHEMICAL INDUSTRY CO. LTD.
  • SPECIALTY MINERALS INC.
  • SUMITOMO CHEMICAL CO. LTD.
  • SUN CHEMICAL GROUP BV
  • TEKNOR COLOR CO.
  • TSE INDUSTRIES INC.
  • UNIROYAL CHEMICAL CO. INC.
  • VELSICOL CHEMICAL LLC
  • WILLOW RIDGE PLASTICS INC.
  • ZEON CHEMICALS LP

Chapter- 11: APPENDIX D: GOVERNMENT REGULATIONS

  • REGULATIONS FOR THE USE OF PLASTICS AND PLASTICS ADDITIVES
  • REGULATIONS CONCERNING APPLICATIONS OF PLASTICS
  • ORGANIZATIONS REGULATING THE USE OF PLASTICS ADDITIVES IN PLASTICS

List of Tables

  • Summary Table : GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 1 : KEY MATERIAL TRENDS IN ADDITIVES
  • Table 2 : KEY ENVIRONMENTAL TRENDS IN ADDITIVES
  • Table 3 : THERMOPLASTICS AND THEIR USES
  • Table 4 : THERMOSETS AND THEIR USES
  • Table 5 : TYPES OF COMMON PLASTICS
  • Table 6 : TYPES OF SPECIAL-PURPOSE PLASTICS
  • Table 7 : ADVANTAGES OF PLASTICS ADDITIVES
  • Table 8 : MAJOR CLASSIFICATIONS OF PLASTICS ADDITIVES
  • Table 9 : TYPES OF PROPERTY MODIFIERS AND THEIR EFFECTS
  • Table 10 : TYPES OF PRIMARY PLASTICIZERS AND THEIR PROPERTIES
  • Table 11 : TYPE OF FILLERS AND THEIR PROPERTIES
  • Table 12 : ADVANTAGES OF SOLID GLASS MICROSPHERES
  • Table 13 : MATERIALS USED AS BLOWING AGENTS
  • Table 14 : U.S. PLASTICS ADDITIVES PATENTS BY COUNTRY, 2006 - 2011
  • Table 15 : U.S. PLASTIC ADDITIVES PATENTS BY TECHNOLOGY TYPE
  • Table 16 : U.S. PLASTICS ADDITIVES PATENTS BY YEAR ISSUED, 2006 - 2011
  • Table 17 : U.S. PLASTICS ADDITIVES PATENTS BY COMPANY, 2006 - 2011
  • Table 18 : GLOBAL PRODUCTION OF PLASTICS BY REGION, THROUGH 2018
  • Table 19 : GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 20 : GLOBAL MARKET FOR PLASTICS ADDITIVES BY REGION, THROUGH 2018
  • Table 21 : GLOBAL MARKET FOR PLASTICIZERS BY TYPE, THROUGH 2018
  • Table 22 : GLOBAL MARKET FOR PLASTICIZERS BY REGION, THROUGH 2018
  • Table 23 : GLOBAL MARKET FOR FLAME RETARDANTS BY TYPE, THROUGH 2018
  • Table 24 : GLOBAL MARKET FOR FLAME RETARDANTS BY REGION, THROUGH 2018
  • Table 25 : GLOBAL MARKET FOR HEAT STABILIZERS BY TYPE, THROUGH 2018
  • Table 26 : GLOBAL MARKET FOR HEAT STABILIZERS BY REGION, THROUGH 2018
  • Table 27 : GLOBAL MARKET FOR FILLERS BY TYPE, THROUGH 2018
  • Table 28 : GLOBAL MARKET FOR FILLERS BY REGION, THROUGH 2018
  • Table 29 : GLOBAL MARKET FOR IMPACT MODIFIERS BY TYPE, THROUGH 2018
  • Table 30 : GLOBAL MARKET FOR IMPACT MODIFIERS BY REGION, THROUGH 2018
  • Table 31 : GLOBAL MARKET FOR ANTIOXIDANTS BY TYPE, THROUGH 2018
  • Table 32 : GLOBAL MARKET FOR ANTIOXIDANTS BY REGION, THROUGH 2018
  • Table 33 : GLOBAL MARKET FOR COLORANTS BY TYPE, THROUGH 2018
  • Table 34 : GLOBAL MARKET FOR COLORANTS BY REGION, THROUGH 2018
  • Table 35 : GLOBAL MARKET FOR LUBRICANTS BY TYPE, THROUGH 2018
  • Table 36 : GLOBAL MARKET FOR LUBRICANTS BY REGION, THROUGH 2018
  • Table 37 : GLOBAL MARKET FOR LIGHT STABILIZERS BY TYPE, THROUGH 2018
  • Table 38 : GLOBAL MARKET FOR LIGHT STABILIZERS BY REGION, THROUGH 2018
  • Table 39 : GLOBAL MARKET FOR BLOWING AGENTS BY TYPE, THROUGH 2018
  • Table 40 : GLOBAL MARKET FOR BLOWING AGENTS BY REGION, THROUGH 2018
  • Table 41 : GLOBAL MARKET FOR BIOCIDES BY TYPE, THROUGH 2018
  • Table 42 : GLOBAL MARKET FOR BIOCIDES BY REGION, THROUGH 2018
  • Table 43 : GLOBAL MARKET FOR ANTISTATIC AGENTS BY TYPE, THROUGH 2018
  • Table 44 : GLOBAL MARKET FOR ANTISTATIC AGENTS BY REGION, THROUGH 2018
  • Table 45 : GLOBAL MARKET FOR MISCELLANEOUS ADDITIVES BY TYPE, THROUGH 2018
  • Table 46 : GLOBAL MARKET FOR MISCELLANEOUS ADDITIVES BY REGION, THROUGH 2018
  • Table 47 : GLOBAL MARKET FOR APPLICATIONS OF PLASTICS ADDITIVES BY INDUSTRY, THROUGH 2018
  • Table 48 : GLOBAL MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 49 : GLOBAL MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 50 : GLOBAL MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 51 : GLOBAL MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 52 : GLOBAL MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 53 : GLOBAL MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 54 : GLOBAL MARKET FOR APPLICATION OF FILLERS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 55 : GLOBAL MARKET FOR APPLICATION OF FILLERS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 56 : GLOBAL MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 57 : GLOBAL MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 58 : GLOBAL MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 59 : GLOBAL MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 60 : GLOBAL MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 61 : GLOBAL MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 62 : GLOBAL MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 63 : GLOBAL MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 64 : GLOBAL MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 65 : GLOBAL MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 66 : GLOBAL MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 67 : GLOBAL MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 68 : GLOBAL MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 69 : GLOBAL MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 70 : GLOBAL MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 71 : GLOBAL MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 72 : GLOBAL MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN PRODUCTS, THROUGH 2018
  • Table 73 : GLOBAL MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN INDUSTRIES, THROUGH 2018
  • Table 74 : EUROPEAN PRODUCTION OF PLASTICS BY COUNTRY/REGION, THROUGH 2018
  • Table 75 : EUROPEAN MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 76 : EUROPEAN MARKET FOR PLASTICIZERS BY TYPE, THROUGH 2018
  • Table 77 : EUROPEAN MARKET FOR FLAME RETARDANTS BY TYPE, THROUGH 2018
  • Table 78 : EUROPEAN MARKET FOR HEAT STABILIZERS BY TYPE, THROUGH 2018
  • Table 79 : EUROPEAN MARKET FOR FILLERS BY TYPE, THROUGH 2018
  • Table 80 : EUROPEAN MARKET FOR IMPACT MODIFIERS BY TYPE, THROUGH 2018
  • Table 81 : EUROPEAN MARKET FOR ANTIOXIDANTS BY TYPE, THROUGH 2018
  • Table 82 : EUROPEAN MARKET FOR COLORANTS BY TYPE, THROUGH 2018
  • Table 83 : EUROPEAN MARKET FOR LUBRICANTS BY TYPE, THROUGH 2018
  • Table 84 : EUROPEAN MARKET FOR LIGHT STABILIZERS BY TYPE, THROUGH 2018
  • Table 85 : EUROPEAN MARKET FOR BLOWING AGENTS BY TYPE, THROUGH 2018
  • Table 86 : EUROPEAN MARKET FOR BIOCIDES BY TYPE, THROUGH 2018
  • Table 87 : EUROPEAN MARKET FOR ANTISTATIC AGENTS BY TYPE, THROUGH 2018
  • Table 88 : EUROPEAN MARKET FOR MISCELLANEOUS ADDITIVES BY TYPE, THROUGH 2018
  • Table 89 : EUROPEAN MARKET FOR APPLICATIONS OF PLASTICS ADDITIVES, THROUGH 2018
  • Table 90 : EUROPEAN MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 91 : EUROPEAN MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 92 : EUROPEAN MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 93 : EUROPEAN MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 94 : EUROPEAN MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 95 : EUROPEAN MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 96 : EUROPEAN MARKET FOR APPLICATION OF FILLERS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 97 : EUROPEAN MARKET FOR APPLICATION OF FILLERS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 98 : EUROPEAN MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 99 : EUROPEAN MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 100 : EUROPEAN MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 101 : EUROPEAN MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 102 : EUROPEAN MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 103 : EUROPEAN MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 104 : EUROPEAN MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 105 : EUROPEAN MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 106 : EUROPEAN MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 107 : EUROPEAN MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 108 : EUROPEAN MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 109 : EUROPEAN MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 110 : EUROPEAN MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 111 : EUROPEAN MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 112 : EUROPEAN MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Table 113 : EUROPEAN MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 114 : EUROPEAN MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN PRODUCTS, THROUGH 2018
  • Table 115 : EUROPEAN MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN INDUSTRIES, THROUGH 2018
  • Table 116 : EUROPEAN MARKET DISTRIBUTION OF PLASTICS ADDITIVES BY COUNTRY/REGION, THROUGH 2018
  • Table 117 : GERMAN MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 118 : GERMAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 119 : FRENCH MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 120 : FRENCH MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 121 : SPANISH MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 122 : SPANISH MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 123 : ITALIAN MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 124 : IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 125 : U.K. MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 126 : U.K. MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 127 : RUSSIAN MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 128 : RUSSIAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 129 : TURKISH MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 130 : TURKISH MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 131 : CEE COUNTRIES MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 132 : CEE COUNTRIES MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, THROUGH 2018
  • Table 133 : THE REST OF THE EUROPEAN MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
  • Table 134 : THE REST OF THE EUROPEAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES TYPE, THROUGH 2018
  • Table 135 : LIST OF MERGERS/ACQUISITIONS/EXPANSIONS IN PLASTICS ADDITIVE INDUSTRY, 2007 - 2012
  • Table 136 : LIST OF PATENTS COVERING PLASTICS ADDITIVES
  • Table 137 : MANUFACTURERS/SUPPLIERS OF PLASTICS ADDITIVES

List of Figures

  • Summary Figure : GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 1 : GLOBAL PRODUCTION OF PLASTICS BY REGION, 2010-2018
  • Figure 2 : GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 3 : GLOBAL MARKET FOR PLASTICS ADDITIVES BY REGION, 2010-2018
  • Figure 4 : GLOBAL MARKET FOR PLASTICIZERS BY TYPE, 2010-2018
  • Figure 5 : GLOBAL MARKET FOR PLASTICIZERS BY REGION, 2010-2018
  • Figure 6 : GLOBAL MARKET FOR FLAME RETARDANTS BY TYPE, 2010-201
  • Figure 7 : GLOBAL MARKET FOR FLAME RETARDANTS BY REGION, 2010-2018
  • Figure 8 : GLOBAL MARKET FOR HEAT STABILIZERS, 2010-2018
  • Figure 9 : GLOBAL MARKET FOR HEAT STABILIZERS BY REGION, 2010-2018
  • Figure 10 : GLOBAL MARKET FOR FILLERS BY REGION, 2010-2018
  • Figure 11 : GLOBAL MARKET FOR FILLERS BY REGION, 2010-2018
  • Figure 12 : GLOBAL MARKET FOR IMPACT MODIFIERS BY TYPE, 2010-2018
  • Figure 13 : GLOBAL MARKET FOR IMPACT MODIFIERS BY REGION, 2010-2018
  • Figure 14 : GLOBAL MARKET FOR ANTIOXIDANTS BY TYPE, 2010-2018
  • Figure 15 : GLOBAL MARKET FOR ANTIOXIDANTS BY REGION, 2010-2018
  • Figure 16 : GLOBAL MARKET FOR COLORANTS BY TYPE, 2010-2018
  • Figure 17 : GLOBAL MARKET FOR COLORANTS BY REGION, 2010-2018
  • Figure 18 : GLOBAL MARKET FOR LUBRICANTS BY TYPE, 2010-2018
  • Figure 19 : GLOBAL MARKET FOR LUBRICANTS BY REGION, 2010-2018
  • Figure 20 : GLOBAL MARKET FOR LIGHT STABILIZERS BY TYPE, 2010-2018
  • Figure 21 : GLOBAL MARKET FOR LIGHT STABILIZERS BY REGION, 2010-2018
  • Figure 22 : GLOBAL MARKET FOR BLOWING AGENTS BY TYPE, 2010-2018
  • Figure 23 : GLOBAL MARKET FOR BLOWING AGENTS BY REGION, 2010-2018
  • Figure 24 : GLOBAL MARKET FOR BIOCIDES BY TYPE, 2010-2018
  • Figure 25 : GLOBAL MARKET FOR BIOCIDES BY REGION, 2010-2018
  • Figure 26 : GLOBAL MARKET FOR ANTISTATIC AGENTS BY TYPE, 2010-2018
  • Figure 27 : GLOBAL MARKET FOR ANTISTATIC AGENTS BY REGION, 2010-2018
  • Figure 28 : GLOBAL MARKET FOR MISCELLANEOUS ADDITIVE BY TYPE, 2010-2018
  • Figure 29 : GLOBAL MARKET FOR MISCELLANEOUS ADDITIVES BY REGION, 2010-2018
  • Figure 30 : GLOBAL MARKET FOR APPLICATIONS OF PLASTICS ADDITIVES BY INDUSTRY, 2010-2018
  • Figure 31 : GLOBAL MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 32 : GLOBAL MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 33 : GLOBAL MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 34 : GLOBAL MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 35 : GLOBAL MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 36 : GLOBAL MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 37 : GLOBAL MARKET FOR APPLICATION OF FILLERS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 38 : GLOBAL MARKET FOR APPLICATION OF FILLERS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 39 : GLOBAL MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 40 : GLOBAL MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 41 : GLOBAL MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 42 : GLOBAL MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 43 : GLOBAL MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 44 : GLOBAL MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 45 : GLOBAL MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 46 : GLOBAL MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 47 : GLOBAL MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 48 : GLOBAL MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 49 : GLOBAL MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 50 : GLOBAL MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 51 : GLOBAL MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS PRODUCTS, 2010-2018
  • Figure 52 : GLOBAL MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 53 : GLOBAL MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 54 : GLOBAL MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 55 : GLOBAL MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN PRODUCTS, 2010-2018
  • Figure 56 : GLOBAL MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN INDUSTRIES, 2010-2018
  • Figure 57 : EUROPEAN PRODUCTION OF PLASTICS BY COUNTRY/REGION, 2010-2018
  • Figure 58 : EUROPEAN MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 59 : EUROPEAN MARKET FOR PLASTICIZERS BY TYPE, 2010-2018
  • Figure 60 : EUROPEAN MARKET FOR FLAME RETARDANTS BY TYPE, 2010-2018
  • Figure 61 : EUROPEAN MARKET FOR HEAT STABILIZERS BY TYPE, 2010-2018
  • Figure 62 : EUROPEAN MARKET FOR FILLERS BY TYPE, 2010-2018
  • Figure 63 : EUROPEAN MARKET FOR IMPACT MODIFIERS BY TYPE, 2010-2018
  • Figure 64 : EUROPEAN MARKET FOR ANTIOXIDANTS BY TYPE, 2010-2018
  • Figure 65 : EUROPEAN MARKET FOR COLORANTS BY TYPE, 2010-2018
  • Figure 66 : EUROPEAN MARKET FOR LUBRICANTS BY TYPE, 2010-2018
  • Figure 67 : EUROPEAN MARKET FOR LIGHT STABILIZERS BY TYPE, 2010-2018
  • Figure 68 : EUROPEAN MARKET FOR BLOWING AGENTS BY TYPE, 2010-2018
  • Figure 69 : EUROPEAN MARKET FOR BIOCIDES BY TYPE, 2010-2018
  • Figure 70 : EUROPEAN MARKET FOR ANTISTATIC AGENTS BY TYPE, 2010-2018
  • Figure 71 : EUROPEAN MARKET FOR MISCELLANEOUS ADDITIVES BY TYPE, 2010-2018
  • Figure 72 : EUROPEAN MARKET FOR APPLICATIONS OF PLASTICS ADDITIVES, 2010-2018
  • Figure 73 : EUROPEAN MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 74 : EUROPEAN MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 75 : EUROPEAN MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 76 : EUROPEAN MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 77 : EUROPEAN MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 78 : EUROPEAN MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 79 : EUROPEAN MARKET FOR APPLICATION OF FILLERS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 80 : EUROPEAN MARKET FOR APPLICATION OF FILLERS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 81 : EUROPEAN MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 82 : EUROPEAN MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 83 : EUROPEAN MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 84 : EUROPEAN MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 85 : EUROPEAN MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 86 : EUROPEAN MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 87 : EUROPEAN MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS PRODUCTS, THROUGH 2018
  • Figure 88 : EUROPEAN MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 89 : EUROPEAN MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 90 : EUROPEAN MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 91 : EUROPEAN MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 92 : EUROPEAN MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 93 : EUROPEAN MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS PRODUCTS, 2010-2018
  • Figure 94 : EUROPEAN MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 95 : EUROPEAN MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS PRODUCTS, 2010-2018
  • Figure 96 : EUROPEAN MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 97 : EUROPEAN MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN PRODUCTS, 2010-2018
  • Figure 98 : EUROPEAN MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN INDUSTRIES, 2010-2018
  • Figure 99 : EUROPEAN MARKET DISTRIBUTION OF PLASTICS ADDITIVES BY COUNTRY/REGION, 2010-2018
  • Figure 100 : GERMAN MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 101 : GERMAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 102 : FRENCH MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 103 : FRENCH MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 104 : SPANISH MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 105 : SPANISH MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 106 : ITALIAN MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 107 : ITALIAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 108 : U.K. MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 109 : U.K. MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 110 : RUSSIAN MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 111 : RUSSIAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 112 : TURKISH MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 113 : TURKISH MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 114 : CEE COUNTRIES MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 115 : CEE COUNTRIES MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES, 2010-2018
  • Figure 116 : THE REST OF THE EUROPEAN MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
  • Figure 117 : THE REST OF THE EUROPEAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN VARIOUS INDUSTRIES TYPE, 2010-2018
Show More
Pricing