Home Category Region Publishers About Us Contact Us
Home > Market Research Report > Medical Device > Dental Equipment > Australian Market for Dental Prosthetics and CAD/CAM Devices 2010
Category
Medical Device (4399)
Cardiovascular Device (252)
Catheter Equipment (209)
CT and MRI and X ray (146)
Dental Equipment (177)
Disposable Medical Device (83)
Endoscopy Equipment (114)
Healthcare IT (310)
In Vitro Diagnostics Equipment (436)
Medical Imaging (425)
Molecular Imaging/Agents (29)
Nuclear Medical (76)
Ophthalmic Equipment (105)
Orthopedic (343)
Patient Monitoring (384)
Ultra Sound (50)
Wound Care (120)
Market Research Report

Australian Market for Dental Prosthetics and CAD/CAM Devices 2010

Published by iData Research Inc.
Published December, 2009 Product code 113294
Content info 89 Pages
Price
Not Available

This publication has been discontinued on August 4, 2011.

Below is the updated product.

Australian Market for Dental Prosthetics and CAD/CAM Devices 2011
Published: August, 2011
Product code: 207640

Introduction

Abstract

The Australian market for dental prosthetics is the third largest in the Asia-Pacific region. Compared to the other Asia-Pacific countries covered in this report, the impact of the economic recession has been minimal, and therefore the market slowed down only marginally.

This market includes:

  • Crowns and bridges
  • Dentures
  • Dental alloys and porcelain powder
  • Computer aided design/computer aided manufacture (CAD/CAM) systems

This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2015, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.

Table of Contents

TABLE OF CONTENTS

LIST OF FIGURES

LIST OF CHARTS

EXECUTIVE SUMMARY

  • 1.1 OVERVIEW: ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS
  • 1.2 TREND ANALYSIS BY COUNTRY
  • 1.3 MARKET FOR CROWNS AND BRIDGES
  • 1.4 MARKET FOR DENTURES
  • 1.5 MARKET FOR CAD/CAMSYSTEMS
  • 1.6 LEADING COMPETITORS IN THE DENTAL CAD/CAMMARKET

RESEARCH METHODOLOGY

  • 2.1 RESEARCH SCOPE
  • 2.2 IDATA' S 9-STEP METHODOLOGY
    • Step 1: Project Initiation & Team Selection
    • Step 2: Prepare Data Systems and Perform Secondary Research
    • Step 3: Preparation for Interviews & Questionnaire Design
    • Step 4: Performing Primary Research
    • Step 5: Research Analysis: Establishing Baseline Estimates
    • Step 6: Market Forecast and Analysis
    • Step 7: Identify Strategic Opportunities
    • Step 8: Final Review and Market Release
    • Step 9: Customer Feedback and Market Monitoring

INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS

  • 3.1 INTRODUCTION
  • 3.2 CROWNS AND BRIDGES
    • 3.2.1 Crowns
    • 3.2.2 Bridges
    • 3.2.3 Material Types
      • 3.2.3.1 Full-Cast Crowns and Bridges
      • 3.2.3.2 Porcelain-Fused-to-Metal: Semi-Precious and Precious Alloys
      • 3.2.3.3 Porcelain-Fused-to-Metal: Non-Precious Alloys
      • 3.2.3.4 All-Ceramic Devices
      • 3.2.3.5 Hard-Resin Material
  • 3.3 INLAYS AND ONLAYS
    • 3.3.1 Material Types
      • 3.3.1.1 Gold
      • 3.3.1.2 Porcelain
      • 3.3.1.3 Composite Resin
  • 3.4 DENTURES
    • 3.4.1 Full Dentures
    • 3.4.2 Partial Dentures
  • 3.5 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
    • 3.5.1 Conventional Fabrication
    • 3.5.2 CAD/CAM Technology
    • 3.5.3 Three-Dimensional Printing
    • 3.5.4 Digital Impression-Taking

COUNTRY PROFILES

  • 4.1 INTRODUCTION
    • 4.1.1 Population
    • 4.1.2 Median Age
    • 4.1.3 GDP Per Capita
    • 4.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants
    • 4.1.5 Price Index
  • 4.2 SOUTH KOREA
  • 4.3 JAPAN
  • 4.4 AUSTRALIA
  • 4.5 DENTISTS PER CAPITA BY COUNTRY

AUSTRALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS

  • 5.1 INTRODUCTION
  • 5.2 TOTAL MARKET FOR DENTAL PROSTHETICS
    • 5.2.1 Market Analysis and Forecast
  • 5.3 MARKET FOR CROWNS AND BRIDGES
    • 5.3.1 Market Analysis and Forecast
      • 5.3.1.1 Market for Porcelain-Fused-To-Metal Devices
      • 5.3.1.2 Market for Full-Cast Devices
      • 5.3.1.3 Market for All-Ceramic Devices
  • 5.4 MARKET FOR DENTURES
    • 5.4.1 Market Analysis and Forecast
      • 5.4.1.1 Market for Full Dentures
      • 5.4.1.2 Market for Partial Dentures
  • 5.5 TOTAL MARKET FOR CAD/CAM SYSTEMS
    • 5.5.1 Market Analysis and Forecast
    • 5.5.2 Full In-Lab CAD/CAM Systems
    • 5.5.3 Standalone Scanner In-Lab CAD/CAM Systems
    • 5.5.4 Chairside Systems
  • 5.6 DRIVERS AND LIMITERS
    • 5.6.1 Drivers and Limiters for Dental Prosthetics
      • 5.6.1.1 Market Drivers
      • 5.6.1.2 Market Limiters
    • 5.6.2 Drivers and Limiters for CAD/CAM Systems
      • 5.6.2.1 Market Drivers
      • 5.6.2.2 Market Limiters
  • 5.7 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS
    • 5.7.1.1 Competitive Analysis for Full In-Lab CAD/CAM Systems
    • 5.7.1.2 Competitive Analysis for Standalone Scanner In-Lab CAD/CAM System
    • 5.7.1.3 Competitive Analysis for Chairside CAD/CAM systems

ABBREVIATIONS

LIST OF FIGURES

  • EXECUTIVE SUMMARY
  • RESEARCH METHODOLOGY
  • INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
  • COUNTRY PROFILES
  • Figure 5-1: Price Index, Asia-Pacific, 2008
  • Figure 5-2: Country Indicators, Asia-Pacific, 2008
  • Figure 5-3: Dentists Per Capita by Country, Asia-Pacific, 2008
  • AUSTRALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
  • Figure 8-1: Market for Dental Prosthetics, Australia, 2005 - 2015 (US$)
  • Figure 8-2: Market for Dental Prosthetics, Australia, 2005 - 2015 (AUD$)
  • Figure 8-3: Market for Crowns and Bridges, Australia, 2005 - 2015 (US$)
  • Figure 8-4: Market for Crowns and Bridges, Australia, 2005 - 2015 (AUD$)
  • Figure 8-5: Crowns and Bridges Segmented by Material Type, Australia, 2005 2015
  • Figure 8-6: Market for PFM Devices, Australia, 2005 - 2015 (US$)
  • Figure 8-7: Market for PFM Devices, Australia, 2005 - 2015 (AUD$)
  • Figure 8-8: Market for Full-Cast Devices, Australia, 2005 - 2015 (US$)
  • Figure 8-9: Market for Full-Cast Devices, Australia, 2005 - 2015 (AUD$)
  • Figure 8-10: Market for All-Ceramic Devices, Australia, 2005 - 2015 (US$)
  • Figure 8-11: Market for All-Ceramic Devices, Australia, 2005 - 2015 (AUD$)
  • Figure 8-12: Market for Dentures, Australia, 2005 - 2015 (US$)
  • Figure 8-13: Market for Dentures, Australia, 2005 - 2015 (AUD$)
  • Figure 8-14: Dentures Segmented by Type, Australia, 2005 - 2015
  • Figure 8-15: Market for Dentures Segmented by Type, Australia, 2005 - 2015
  • Figure 8-16: Market for CAD/CAM Systems, Australia, 2005 - 2015 (AUD$ and US$)
  • Figure 8-17: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 - 2015 (US$)
  • Figure 8-18: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 - 2015 (AUD$)
  • Figure 8-19: Market for Standalone Scanner In-Lab CAD/CAM Systems, Australia, 2005 - 2015 (US$)
  • Figure 8-20: Market for Standalone Scanner In-Lab CAD/CAM Systems, Australia, 2005 - 2015 (AUD$)
  • Figure 8-21: Market for Chairside CAD/CAM Systems, Australia, 2005 - 2015 (US$)
  • Figure 8-22: Market for Chairside CAD/CAM Systems, Australia, 2005 - 2015 (AUD$)
  • Figure 8-23: Market Drivers and Limiters for Dental Prosthetics, Australia, 2008
  • Figure 8-24: Market Drivers and Limiters for CAD/CAM System, 2008
  • Figure 8-25: Leading Competitors, In-Lab CAD/CAM Systems, Australia, 2008
  • Figure 8-26: Leading Competitors, CAD/CAM Systems, Australia, 2008
  • Figure 8-27: Leading Competitors, Full In-Lab CAD/CAM Systems, Australia, 2008
  • Figure 8-28: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Australia, 2008
  • Figure 8-29: Leading Competitors, Chairside CAD/CAM Systems, Australia, 2008
  • ABBREVIATIONS

LIST OF CHARTS

  • EXECUTIVE SUMMARY
  • Chart 1-1: Market for Dental Prosthetics, Asia-Pacific, 2005 - 2015 (US$)
  • Chart 1-2: Market Value of Dental Prosthetics by Country, 2008
  • Chart 1-3: Unit Share by Material Type for Crowns and Bridges, Asia-Pacific, 2005 - 2015
  • Chart 1-4: Market for Dentures, Asia-Pacific, 2005 - 2015 (US$)
  • Chart 1-5: Market for CAD/CAM Systems, Asia-Pacific, 2005 - 2015 (US$)
  • Chart 1-6: Leading Competitors, In-Lab CAD/CAM Systems, Asia-Pacific, 2008
  • RESEARCH METHODOLOGY
  • INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
  • COUNTRY PROFILES
  • Chart 5-1: Country Statistics, South Korea, 2008
  • Chart 5-2: Country Statistics, Japan, 2008
  • Chart 5-3: Country Statistics, Australia, 2008
  • AUSTRALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
  • Chart 8-1: Market for Dental Prosthetics, Australia, 2005 - 2015 (US$)
  • Chart 8-2: Market for Crowns and Bridges, Australia, 2005 - 2015 (US$)
  • Chart 8-3: Market for Crowns and Bridges Segmented by Material Type, 2008
  • Chart 8-4: Crowns and Bridges by Material Type, Australia, 2005 - 2015
  • Chart 8-5: Market for Dentures, Australia, 2005 - 2015 (US$)
  • Chart 8-6: Market for Dentures Segmented by Type, Australia, 2005 - 2015
  • Chart 8-7: Market for CAD/CAM Systems, Australia, 2005 - 2015 (US$)
  • Chart 8-8: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 - 2015 (US$)
  • Chart 8-9: Market for Standalone Scanner In-Lab CAD/CAM Systems, Australia, 2005 - 2015 (US$)
  • Chart 8-10: Market for Chairside CAD/CAM Systems, Australia, 2005 - 2015 (US$)
  • Chart 8-11: Leading Competitors, In-Lab CAD/CAM Systems, Australia, 2008
  • Chart 8-12: Leading Competitors, CAD/CAM Systems, Australia, 2008
  • Chart 8-13: Leading Competitors, Full In-Lab CAD/CAM System Units, Australia, 2008
  • Chart 8-14: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Australia, 2008
  • Chart 8-15: Leading Competitors, Chairside CAD/CAM System Units, Australia, 2008
  • ABBREVIATIONS
Back to Top