Market Research Report

Asia Pacific Market for Dental Prosthetics and CAD/CAM Devices - Japan, Australia, South Korea
cover Published by iData Research Inc.
Published Product code 207602
Content info 223 Pages
Price

Introduction

Abstract

The Asia-Pacific market includes Japan, South Korea and Australia. The aging population and demand for superior dental aesthetics will drive the dental prosthetics market over the 2011 - 2018 forecast period.

Australia has increasingly been affected by the outsourcing of dental prosthetics, while Japan continues to be affected by some level of economic uncertainty. However, the increasing penetration rate of CAD/CAM technology will offset each of these effects and increasingly drive the dental prosthetics market.

Report Includes:

Competitor Analysis:

We provide a detailed analysis of the competative landscape including market shares and qualitative discussions of the leading and upcoming competitors in each market segment. Identify Strategic Opportunities, Customer Feedback and Market Monitoring, Market Overview by Segment & Country, Trend Analysis by Segment & Country, Market Drivers & Limiters, Mergers & Acqusitions.

Segments included:

TISSUE HEART VALVE,MECHANICAL HEART VALVE,ANNULOPLASTY REPAIR DEVICE,ON-PUMP CORONARY ARTERY BYPASS GRAFT DEVICE,OFF-PUMP CORONARY ARTERY BYPASS GRAFT DEVICE,ENDOSCOPIC VESSEL HARVESTING DEVICE,ANASTOMOSIS ASSIST DEVICE,CARDIAC ABLATION DEVICE,VENTRICULAR ASSIST DEVICE,INTRA-AORTIC BALLOON PUMP DEVICE, ARTIFICIAL HEART DEVICE, PFO AND ATRIAL AND SEPTAL DEFECT REPAIR DEVICE

Table of Contents

Table of Contents

TABLE OF CONTENTS

LIST OF FIGURES

LIST OF CHARTS

EXECUTIVE SUMMARY

  • 1.1 ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS
  • 1.2 CAD/CAM PROSTHETICS MARKET
  • 1.3 CROWN AND BRIDGE MARKET
  • 1.4 DENTURE MARKET
  • 1.5 CAD/CAM SYSTEM MARKET
  • 1.6 FULL IN-LAB CAD/CAMSYSTEM MARKET
  • 1.7 STANDALONE CAD/CAMSCANNER MARKET
  • 1.8 CHAIRSIDE SYSTEM MARKET
  • 1.9 COMPETITIVE ANALYSIS

RESEARCH METHODOLOGY

  • 2.1 RESEARCH SCOPE
  • 2.2 IDATA'S 9-STEP METHODOLOGY
    • Step 1: Project Initiation & Team Selection
    • Step 2: Prepare Data Systems and Perform Secondary Research
    • Step 3: Preparation for Interviews & Questionnaire Design
    • Step 4: Performing Primary Research
    • Step 5: Research Analysis: Establishing Baseline Estimates
    • Step 6: Market Forecast and Analysis
    • Step 7: Identify Strategic Opportunities
    • Step 8: Final Review and Market Release
    • Step 9: Customer Feedback and Market Monitoring

INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM DEVICES

  • 3.1 INTRODUCTION
  • 3.2 CROWNS AND BRIDGES
    • 3.2.1 Crowns
    • 3.2.2 Bridges
    • 3.2.3 Material Types
  • 3.3 INLAY/ONLAYS
    • 3.3.1 Material Types
  • 3.4 VENEERS
    • 3.4.1 Material Types
  • 3.5 DENTURES
    • 3.5.1 Full Dentures
    • 3.5.2 Partial Dentures26
  • 3.6 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
    • 3.6.1 Conventional Fabrication
    • 3.6.2 CAD/CAM Technology
    • 3.6.3 Rapid Prototyping
    • 3.6.4 Intra-Oral Digital Impression-Taking
  • 3.7 CAD/CAM BLOCKS

ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET

  • 4.1 INTRODUCTION
  • 4.2 CURRENCY EXCHANGE RATE
  • 4.3 MARKET ANALYSIS AND FORECAST
    • 4.3.1 Dental Prosthetics 31
    • 4.3.2 CAD/CAM Prosthetics Market
    • 4.3.3 CAD/CAM System Market
    • 4.3.4 CAD/CAM Block Market
  • 4.4 TREND ANALYSIS BY SEGMENT
  • 4.5 MARKET DRIVERS AND LIMITERS
    • 4.5.1 Market Drivers
    • 4.5.2 Market Limiters
  • 4.6MERGERS AND ACQUISITIONS

COUNTRY PROFILES

  • 5.1 INTRODUCTION
    • 5.1.1 Population
    • 5.1.2 Median Age
    • 5.1.3 GDP per Capita
    • 5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants
    • 5.1.5 Price Index
    • 5.1.6 Asia-Pacific Dental Prosthetics per Capita Summary
  • 5.2 JAPAN
  • 5.3 SOUTH KOREA
  • 5.4 AUSTRALIA
  • 5.5 DENTISTS PER POPULATION

JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET

  • 6.1 INTRODUCTION
  • 6.2 MARKET ANALYSIS AND FORECAST
    • 6.2.1 Dental Prosthetic Device Market
    • 6.2.2 Crown and Bridge Market
      • 6.2.2.1 Porcelain-Fused Metal (PFM) Device Market
      • 6.2.2.2 Full-Cast Device Market
      • 6.2.2.3 All-Ceramic Device Market
      • 6.2.2.4 Hard-Resin Device Market
    • 6.2.3 CAD/CAM Prosthetics Market
      • 6.2.3.1 Chairside CAD/CAM Prosthetics Market
      • 6.2.3.2 In-Lab CAD/CAM Prosthetics Market
    • 6.2.4 Denture Market
      • 6.2.4.1 Full Denture Market
      • 6.2.4.2 Partial Denture Market
    • 6.2.5 CAD/CAM System Market
      • 6.2.5.1 Full In-Lab CAD/CAM System Market
      • 6.2.5.2 Standalone Scanner CAD/CAM System Market
      • 6.2.5.3 Chairside CAD/CAM System Market
    • 6.2.6 CAD/CAM Block Market
      • 6.2.6.1 CAD/CAM Block Market by Material Type
  • 6.3 MARKET DRIVERS AND LIMITERS
    • 6.3.1 Market Drivers
    • 6.3.2 Market Limiters
  • 6.4 COMPETITIVE ANALYSIS
    • 6.4.1 CAD/CAM Prosthetics Market
    • 6.4.2 CAD/CAM System Market

SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET

  • 7.1 INTRODUCTION
  • 7.2 MARKET ANALYSIS AND FORECAST 1
    • 7.2.1 Total Dental Prosthetics Market
    • 7.2.2 Crown and Bridge Market
      • 7.2.2.1 Porcelain-Fused Metal Market
      • 7.2.2.2 Full-Cast Market
      • 7.2.2.3 All-Ceramic Market
    • 7.2.3 CAD/CAM Prosthetics Market
      • 7.2.3.1 Chairside CAD/CAM Prosthetics
      • 7.2.3.2 In-Lab CAD/CAM Prosthetics Market
    • 7.2.4 Denture Market
      • 7.2.4.1 Full Denture Market
      • 7.2.4.2 Partial Denture Market
    • 7.2.5 CAD/CAM System Market
      • 7.2.5.1 Full In-Lab CAD/CAM System Market
      • 7.2.5.2 Standalone Scanner CAD/CAM System Market
      • 7.2.5.3 Chairside CAD/CAM System Market
  • 7.3 CAD/CAM BLOCK MARKET
    • 7.3.1 CAD/CAM Block Market by Material Type
      • 7.3.1.1 Zirconia
      • 7.3.1.2 Porcelain
      • 7.3.1.3 Acrylic
      • 7.3.1.4 Metal
  • 7.4 MARKET DRIVERS AND LIMITERS
    • 7.4.1 Market Drivers
    • 7.4.2 Market Limiters
  • 7.5 COMPETITIVE ANALYSIS
    • 7.5.1 CAD/CAM Prosthetics Market
    • 7.5.2 Total CAD/CAM System Market

AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET

  • 8.1 INTRODUCTION
  • 8.2 MARKET ANALYSIS AND FORECAST
    • 8.2.1 Dental Prosthetics Market
    • 8.2.2 Crown and Bridge Market
      • 8.2.2.1 Porcelain-Fused Metal Market
      • 8.2.2.2 Full-Cast Market
      • 8.2.2.3 All-Ceramic Device Market
    • 8.2.3 CAD/CAM Prosthetics Market
      • 8.2.3.1 Chairside CAD/CAM Prosthetics Market
      • 8.2.3.2 In-Lab CAD/CAM Prosthetics Market
  • 8.3 DENTURE MARKET
    • 8.3.1.1 Full Denture Market
      • 8.3.1.2 Partial Denture Market
    • 8.3.2 CAD/CAM System Market
      • 8.3.2.1 Full In-Lab CAD/CAM System Market
      • 8.3.2.2 Standalone Scanner CAD/CAM System Market
      • 8.3.2.3 Chairside CAD/CAM System Market
  • 8.4 CAD/CAM BLOCK MARKET
    • 8.4.1 Market Overview
    • 8.4.2 CAD/CAM Block Market by Material Type
      • 8.4.2.1 Zirconia
      • 8.4.2.2 Porcelain
      • 8.4.2.3 Acrylic
      • 8.4.2.4 Metal
  • 8.5 MARKET DRIVERS AND LIMITERS
    • 8.5.1 Market Drivers
    • 8.5.2 Market Limiters
  • 8.6 COMPETITIVE ANALYSIS
    • 8.6.1 CAD/CAM Prosthetics Market
    • 8.6.2 CAD/CAM System Market

ABBREVIATIONS

Asia Pacific Market for Dental Prosthetics and CAD/CAM Devices - Japan, Australia, South Korea published by iData Research Inc. in September 1, 2012. This report consists of 223 Pages and the price starts from US $ 7995.

The contents of this page may be different from the latest version. Please contact us for details.
Back to Top