Cover Image
Market Research Report

Metal Powders for Additive Technologies and 3D-printers in Russia: Production, Market and Forecast (3rd edition)

Published by INFOMINE Research Group Product code 353063
Published Content info
Delivery time: Inquiry
Price

Notice: The original report is written in Russian. Please ask us for more information regarding delivery time.

Back to Top
Metal Powders for Additive Technologies and 3D-printers in Russia: Production, Market and Forecast (3rd edition)
Published: September 27, 2018 Content info:
Description

This report is the 3rd edition of the market research of metal powders for additive technologies in Russia.

The purpose of the study is to analyze the market of additive technologies using metal powders in Russia.

This work is a desk study. As sources of information, data from the Federal State Statistics Service, the Federal Customs Service of the Russian Federation, materials from the sectoral and regional press, annual and quarterly reports of companies, Internet sites of enterprises, scientific and technical literature, the Infomain database were used.

Chronological framework of the study: 2009-2017, 1st half of 2018, forecast - until 2020.

Geography of the research: Russia.

Scope of the research: the report consists of 10 chapters, contains 112 pages, including 26 tables, 29 figures and 3 annexes.

The first chapter of the report is devoted to a brief review of the state of additive technologies in the world.

The second chapter shows the main world companies in the market of additive technologies. The characteristics of the produced 3D printers working with the use of metallic powders are given.

The third chapter provides an overview of Russian companies implementing projects to create equipment for additive technologies.

In the fourth chapter, the main technologies for the production of metal powders for additive technologies and corresponding equipment are considered. Also the nomenclature of metal powders produced by world manufacturers for additive technologies is presented.

The fifth chapter is devoted to the situation with the production of metal powders for additive technologies in Russia. Described companies that have and create capacity to produce these products.

The sixth chapter provides data on imports of RF in 2009-2018 equipment for additive technologies that use metallic powders, with distribution in the areas of supply. The chapter is supplemented with detailed information on Russian importers, foreign suppliers of 3D printers, equipment characteristics in 2009-2018.

The seventh chapter provides data on the import of the Russian Federation in 2009-2018 metal powders for additive technologies with a distribution by supply chain. Also, the dynamics of import prices for various types of powders is given. The chapter is supplemented with detailed information on Russian importers, foreign suppliers of metal powders for additive technologies in 2009-2018.

The eighth chapter gives a description of the main Russian importers of metal powders and 3D printers (LLC "IF AB Universal" and LLC Nissa Digispace).

The ninth chapter is devoted to the description of the situation with the development of additive technologies based on the example of the main participants of this market (JSC ODK Aviadvigatel, PJSC UDK Saturn, Novomet-Perm JSC, etc.).

In the ten chapter, an overview of the state and prospects of the development of additive technologies in Russia is made, and a forecast is given for the consumption of metallic powders for additive technologies in Russia until 2020.

The annexes provide contact information for the main enterprises operating in the market of additive technologies in Russia, expanded information on imports of 3D printers and metal powders by Russian enterprises.

The target audience of the study:

  • participants of the market of additive technologies;
  • potential investors.

The proposed study claims to be a reference tool for specialists working in the market of additive technologies and taking managerial decisions.

Table of Contents

Table of Contents

Annotation

Introduction

1.State and prospects of using additive technologies in the world

2. World-wide equipment for additive processes using metal powders

3. Manufacture of devices for additive technologies in Russia

4. Production technologies and nomenclature of produced metal powders for additive technologies in the world

5. Production of metal powders for additive technologies in Russia

6. Russia's import of devices for additive technologies with metal powders in 2009-2018

7. Russia's imports of metal powders for additive technologies in 2009-2018

8. The main importing companies of 3D printers and metal powders for additive technologies

  • LLC "Engineering firm AB" Universal "(Moscow)
  • OOO Nissa Digispace (Moscow)

9. Industrial companies-consumers of metal powders for additive technologies in Russia

  • JSC "ODK Aviadvigatel"
  • PJSC "ODK" Saturn "
  • Novomet-Perm JSC
  • The Center of Technological Competence of Additive Technologies (CTCAT)

10. The state and prospects of additive technologies in Russia and the use of metal powders for them

Appendix 1. Address book of the main participants of the market of additive technologies using metal powders in Russia

Appendix 2. Foreign suppliers and Russian importers of apparatuses for additive technologies for metal powders, characteristics of imported products, volume / price (2009-2017, 1st half of 2018)

Appendix 3. Foreign suppliers and Russian importers of metal powders for additive technologies, characteristics of imported products, volume / price (2009-2017, 1st half of 2018)

List of tables

  • Table 1: Change in the structure of the use of additive technologies in 2012 and 2016,%
  • Table 2: Basic parameters of 3D devices for layer-by-layer synthesis from metal powder compositions
  • Table 3: Technical characteristics of the URAM brand
  • Table 4: Fields of application of parts from various metallic powders obtained by laser sintering technology
  • Table 5: Powder compositions supplied by manufacturers of AM machines
  • Table 6: LPW Technology Powder Nomenclature for use in AM machines
  • Table 7: Technical and economic parameters of the centrifugal sputtering installation of the melt Sferamet LLC
  • Table 8: Supply of powders for additive technologies of Russian companies in 2015-2018
  • Table 9: Countries supplying 3D printers for metal powders in Russia in 2009-2018, ths dollars.
  • Table 10: Deliveries in the Russian Federation of 3D printers by foreign manufacturers in 2009-2018, units
  • Table 11: Russian importers of 3D printers for metal powders in 2009-2018, units
  • Table 12: Import of the Russian Federation of metallic powders for additive technologies by types in 2009-2018, kg
  • Table 13: Supplier countries in Russia of metal powders for additive technologies in 2009-2018, kg
  • Table 14. Deliveries in Russia of metal powders for additive technologies by major foreign producers in 2009-2018, kg
  • Table 15: Average annual import prices of the Russian Federation for metal powders for additive technologies in 2009-2018, $ / kg
  • Table 16: Russian companies importing metal powders for additive technologies in 2009-2018, kg
  • Table 17: Import prices of the Russian Federation for metallic powders of various grades for additive technologies from various foreign producers in 2009-2018, $ / kg
  • Table 18: Deliveries of "Universal" powders for 3D printers to a number of Russian companies
  • Table 19: Deliveries of "Universal" supplies of 3D printers to a number of Russian companies
  • Table 20: The main financial indicators of LLC "IF AB Universal" in 2008-2016, million rubles.
  • Table 21: Deliveries of Nissa Digispace Ltd. powders for 3D printers to a number of Russian companies
  • Table 22: Deliveries of Nissa Digispace LLC to 3D printers to a number of Russian companies
  • Table 23: The main financial indicators of Nissan Nissiskis LLC in 2009-2016, million rubles.
  • Table 24: Supplies of metal powders to JSC "ODK Aviadvigatel"
  • Table 25: Supplies of metal powders to PJSC "ODK" Saturn "
  • Table 26: Import of metal powders of Novomet-Perm JSC in 2011-2018

List of figures

  • Figure 1: Dynamics of the world market of additive technologies in 2009-2017, billion dollars.
  • Figure 2: Dynamics of sales in the world of 3D printers for metal powders in 2010-2017, units
  • Figure 3: Geographical structure of used 3D printers (1988-2016), %
  • Figure 4: The structure of the market of metal AM in the context of world players (2017),%
  • Figure 5: Schematic diagram of the selective laser sintering device (SLS)
  • Figure 6: SLM 280 selective laser alloying machine from SLM Solution (Germany)
  • Figure 7: Concept Line Laser X line 1000R AM machine
  • Figure 8: EOSINT 280 EOS machine from EOS company
  • Figure 9: Schematic diagram of electron-beam melting technology (Electron Beam Melting - EBM)
  • Figure 10: The device DMD IC106 from POM Group
  • Figure 11: The LENS MR7 device from Optomec
  • Figure 12: Installation of laser selective fusion ATK PS
  • Figure 13: Laser installation for the additive production of products from metal powder ML71
  • Figure 14: Atomizer melting chamber VIGA 2
  • Figure 15: Atomizer EIGA 50
  • Figure 16: Atomizer Hermiga 75/3
  • Figure 17: Atomising Systems atomizer
  • Figure 18: Structure of use of different types of metal powders for 3D-technologies,%
  • Figure 19: Installation of the centrifugal spraying of the melt Sferamet LLC
  • Figure 20: Installation of layered laser alloying M2 Cusing company «Concept Laser»
  • Figure 21: Road Map for Development of Additive Technologies of Rosatom
  • Figure 22: Atomizer ALD VIGA-2B
  • Figure 23: Dynamics of imports of RF 3D printers for metal powders in 2009-2018, units, thousand dollars.
  • Figure 24: Dynamics of imports of RF parts of 3D printers for metal powders in 2009-2018, ths dollars.
  • Figure 25: Structure of supply in Russia of 3D printers by major foreign producers in 2009-2017, 1 hy 2018,%
  • Figure 26: Dynamics of imports of RF metal powders for additive technologies in 2009-2018, kg, thousand dollars.
  • Figure 27: Structure of imports of metal powders for additive technologies by types in 2009-2018,%
  • Figure 28: Directions of work of the Additive Technologies Center of PJSC "ODK" Saturn "
  • Figure 29: Forecast of consumption of metallic powders for additive technologies in Russia up to 2020, t
Back to Top