Waterproofing Products Market By Product Type, By Application : Global Opportunity Analysis and Industry Forecast, 2023-2033

List of Tables

The global waterproofing products market was valued at $42.5 billion in 2019 and is projected to reach $66.1 billion by 2033, growing at a CAGR of 3.8% from 2023 to 2033.

Waterproofing is the process of making an object or structure watertight or water-resistant so that it is relatively unaffected by water or resists the infiltration of water under specific conditions. These products can be utilized in damp settings or at specific depths underwater. Water-resistant and waterproof often refer to resistance to liquid water penetration, potentially under pressure, whereas dampproof refers to resistance to humidity or dampness. The rate of water vapor transmission through a substance or structure is referred to as the moisture vapor transmission rate (MVTR).

Numerous bridges globally are in dire need of repair. According to the n Infrastructure Report Card 2021, the U.S. has 614,387 bridges, of which about 40% are 50 years or older and approaching the end of their authorized service life. In snowy climates, deicing salts are widely used to remedy hazardous circumstances. Chloride ions from deicing salts can pass through permeable concrete structures with water and begin to damage the steel beneath. This attack's corrosion not only weakens the steel but can also contribute to the spalling of the surrounding concrete. This causes the bridge's load-bearing capability and riding surface quality to deteriorate.

On the bridge, waterproofing membranes prevent water from penetrating the structure's components. The waterproofing membrane is a thin, impermeable layer used in conjunction with an asphalt overlay (as the riding surface) to protect the bridge's underlying structure. Elastomeric waterproofing membranes are designed to provide longer protection, with the asphalt overlay serving as a sacrificial surface that may be removed and replaced several times so long as the underlying membrane system is protected. Therefore, waterproof membranes contribute to the preservation of the bridge's integrity.

Tunnels and other buried underground structures are susceptible to seepage water through the soil above them. Due to the increase in demand for infrastructure and transportation globally, the landfills & tunnel liners industry is anticipated develop at a stable rate during the forecast period. LDPE and HDPE are the most prevalent tunnel-lining waterproofing membranes. It is required to put waterproof membranes in tunnels to extend their lifespan and ensure their ongoing, secure use.

Usage of waterproofing products, such as membranes and chemicals, causes environmental and health problems. When employed in spray form, waterproofing membranes can be hazardous to the user and workers in the vicinity. These chemicals may contain fluorinated compounds, which, when inhaled, can lead to chemical pneumonitis, lung damage, and other respiratory issues. Similarly, the application of bitumen-based membranes might expose employees to hazardous fumes. Long-term exposure to these fumes may cause health problems such as bronchitis and nasal discomfort. In addition, personnel with longer tenures have demonstrated increase in nasal and pharyngeal complaints. Solvents, diluents, and other waterproofing membranes can harm the environment by emitting harmful gases and volatile organic compounds. However, these issues can be avoided using respirators, protective equipment, and eco-friendly solutions. Thus, the environmental and health risks associated with waterproofing products is expected to hamper the demand for waterproofing products during the forecast period.

The growing emphasis on sustainable urban development has sparked increased interest in green roofs, presenting a significant opportunity for the waterproofing products market. Green roofs, characterized by vegetation cover, offer numerous environmental benefits, such as improved energy efficiency, reduced urban heat island effect, and enhanced stormwater management. As the adoption of green roofs gains momentum, the demand for effective waterproofing solutions becomes important to prevent water infiltration and structural damage.

The waterproofing products market stands to benefit from this trend, as these roofs necessitate specialized materials to ensure durability and leak prevention. Green roof installations require waterproof membranes, coatings, and sealants to protect buildings from water ingress and provide a reliable barrier against the elements. As awareness of the ecological advantages of green roofs continues to rise, architects, builders, and urban planners are likely to prioritize waterproofing solutions in their projects, thereby fueling the demand for quality waterproofing products. This trend not only addresses environmental concerns but also represents a lucrative avenue for the waterproofing industry, driving innovation and promoting sustainability in construction practices.

The global waterproofing products market is segmented into product type, application, and region. By product type, the market is divided into waterproof paints, polymer waterproof sheets, rigid waterproof materials, asphalt waterproof rolls, building seal waterproof materials and others. By application, it is categorized into roofing and walls, floors and basements, water and waste management, tunnel liners, bridges and highways, and others. region-wise, the market is studied across North America, Europe, Asia-Pacific, South America, and Middle East and Africa.

The major players operating in the global waterproofing products market are BASF SE, Sika AG, Carlisle Companies Inc., RPM International Inc., GCP Applied Technologies Inc., HOLCIM, Soprema Group, GAF, Henry Company, and The Dow Chemical Company. Other players operating in the market are Saint-Gobain Weber GmbH, Fosroc Ltd., Maris Polymers, Pidilite Industries Ltd., and Bayer Material Science AG.

Key Benefits For Stakeholders

This report provides a quantitative analysis of the market segments, current trends, estimations, and dynamics of the waterproofing products market analysis from 2019 to 2033 to identify the prevailing waterproofing products market opportunities.
The market research is offered along with information related to key drivers, restraints, and opportunities.
Porter's five forces analysis highlights the potency of buyers and suppliers to enable stakeholders make profit-oriented business decisions and strengthen their supplier-buyer network.
In-depth analysis of the waterproofing products market segmentation assists to determine the prevailing market opportunities.
Major countries in each region are mapped according to their revenue contribution to the global market.
Market player positioning facilitates benchmarking and provides a clear understanding of the present position of the market players.
The report includes the analysis of the regional as well as global waterproofing products market trends, key players, market segments, application areas, and market growth strategies.

Additional benefits you will get with this purchase are:

Quarterly Update and* (only available with a corporate license, on listed price)
5 additional Company Profile of client Choice pre- or Post-purchase, as a free update.
Free Upcoming Version on the Purchase of Five and Enterprise User License.
16 analyst hours of support* (post-purchase, if you find additional data requirements upon review of the report, you may receive support amounting to 16 analyst hours to solve questions, and post-sale queries)
15% Free Customization* (in case the scope or segment of the report does not match your requirements, 15% is equivalent to 3 working days of free work, applicable once)
Free data Pack on the Five and Enterprise User License. (Excel version of the report)
Free Updated report if the report is 6-12 months old or older.
24-hour priority response*
Free Industry updates and white papers.

Possible Customization with this report (with additional cost and timeline, please talk to the sales executive to know more)

Manufacturing Capacity
Capital Investment breakdown
Product Benchmarking / Product specification and applications
Product Life Cycles
Supply Chain Analysis & Vendor Margins
Upcoming/New Entrant by Regions
Technology Trend Analysis
Market share analysis of players by products/segments
New Product Development/ Product Matrix of Key Players
Patient/epidemiology data at country, region, global level
Regulatory Guidelines
Additional company profiles with specific to client's interest
Additional country or region analysis- market size and forecast
Average Selling Price Analysis / Price Point Analysis
Expanded list for Company Profiles
Historic market data
Import Export Analysis/Data
Key player details (including location, contact details, supplier/vendor network etc. in excel format)
List of customers/consumers/raw material suppliers- value chain analysis
Market share analysis of players at global/region/country level
Product Consumption Analysis
Volume Market Size and Forecast

Key Market Segments

By Product Type

Waterproof Paints
Polymer Waterproof Sheets
Rigid Waterproof Materials
Asphalt Waterproof Rolls
Building Seal Waterproof Materials
Others

By Application

Roofing and Walls
Floors and Basements
Bridges and Highways
Water and Waste Management
Tunnel Liners
Others

By Region

North America
- U.S.
- Mexico
- Canada
Europe
- Germany
- France
- UK
- Rest of Europe
Asia-Pacific
- China
- Japan
- India
- Indonesia
- Vietnam
- Rest of Asia-Pacific
South America
- Brazil
- Argentina
- Chile
- Rest Of South America
Middle East and Africa
- South Africa
- Saudi Arabia
- UAE
- Rest of Middle East And Africa

Key Market Players:

Sika AG
Carlisle Companies Inc.
GCP Applied Technologies Inc.
RPM International Inc.
Henry Company
GAF.
Soprema
HOLCIM
BASF SE
Dow

Product Code: A31432

CHAPTER 1: INTRODUCTION

1.1. Report description
1.2. Key market segments
1.3. Key benefits to the stakeholders
1.4. Research methodology
- 1.4.1. Primary research
- 1.4.2. Secondary research
- 1.4.3. Analyst tools and models

CHAPTER 2: EXECUTIVE SUMMARY

2.1. CXO Perspective

CHAPTER 3: MARKET OVERVIEW

3.1. Market definition and scope
3.2. Key findings
- 3.2.1. Top impacting factors
- 3.2.2. Top investment pockets
3.3. Porter's five forces analysis
- 3.3.1. Moderate bargaining power of suppliers
- 3.3.2. Moderate threat of new entrants
- 3.3.3. Low threat of substitutes
- 3.3.4. High intensity of rivalry
- 3.3.5. Moderate bargaining power of buyers
3.4. Market dynamics
- 3.4.1. Drivers
  - 3.4.1.1. Increase in use of waterproofing membranes in infrastructure applications
  - 3.4.1.2. Surge in residential construction
- 3.4.2. Restraints
  - 3.4.2.1. Environmental and health risks associated with waterproofing products
- 3.4.3. Opportunities
  - 3.4.3.1. Increase in awareness of green roofs
3.5. Value Chain Analysis
3.6. Key Regulation Analysis
3.7. Patent Landscape
3.8. Regulatory Guidelines

CHAPTER 4: WATERPROOFING PRODUCTS MARKET, BY PRODUCT TYPE

4.1. Overview
- 4.1.1. Market size and forecast
4.2. Waterproof Paints
- 4.2.1. Key market trends, growth factors and opportunities
- 4.2.2. Market size and forecast, by region
- 4.2.3. Market share analysis by country
4.3. Polymer Waterproof Sheets
- 4.3.1. Key market trends, growth factors and opportunities
- 4.3.2. Market size and forecast, by region
- 4.3.3. Market share analysis by country
4.4. Rigid Waterproof Materials
- 4.4.1. Key market trends, growth factors and opportunities
- 4.4.2. Market size and forecast, by region
- 4.4.3. Market share analysis by country
4.5. Asphalt Waterproof Rolls
- 4.5.1. Key market trends, growth factors and opportunities
- 4.5.2. Market size and forecast, by region
- 4.5.3. Market share analysis by country
4.6. Building Seal Waterproof Materials
- 4.6.1. Key market trends, growth factors and opportunities
- 4.6.2. Market size and forecast, by region
- 4.6.3. Market share analysis by country
4.7. Others
- 4.7.1. Key market trends, growth factors and opportunities
- 4.7.2. Market size and forecast, by region
- 4.7.3. Market share analysis by country

CHAPTER 5: WATERPROOFING PRODUCTS MARKET, BY APPLICATION

5.1. Overview
- 5.1.1. Market size and forecast
5.2. Roofing and Walls
- 5.2.1. Key market trends, growth factors and opportunities
- 5.2.2. Market size and forecast, by region
- 5.2.3. Market share analysis by country
5.3. Floors and Basements
- 5.3.1. Key market trends, growth factors and opportunities
- 5.3.2. Market size and forecast, by region
- 5.3.3. Market share analysis by country
5.4. Bridges and Highways
- 5.4.1. Key market trends, growth factors and opportunities
- 5.4.2. Market size and forecast, by region
- 5.4.3. Market share analysis by country
5.5. Water and Waste Management
- 5.5.1. Key market trends, growth factors and opportunities
- 5.5.2. Market size and forecast, by region
- 5.5.3. Market share analysis by country
5.6. Tunnel Liners
- 5.6.1. Key market trends, growth factors and opportunities
- 5.6.2. Market size and forecast, by region
- 5.6.3. Market share analysis by country
5.7. Others
- 5.7.1. Key market trends, growth factors and opportunities
- 5.7.2. Market size and forecast, by region
- 5.7.3. Market share analysis by country

CHAPTER 6: WATERPROOFING PRODUCTS MARKET, BY REGION

6.1. Overview
- 6.1.1. Market size and forecast By Region
6.2. North America
- 6.2.1. Key market trends, growth factors and opportunities
- 6.2.2. Market size and forecast, by Product Type
- 6.2.3. Market size and forecast, by Application
- 6.2.4. Market size and forecast, by country
  - 6.2.4.1. U.S.
  - 6.2.4.1.1. Market size and forecast, by Product Type
  - 6.2.4.1.2. Market size and forecast, by Application
  - 6.2.4.2. Mexico
  - 6.2.4.2.1. Market size and forecast, by Product Type
  - 6.2.4.2.2. Market size and forecast, by Application
  - 6.2.4.3. Canada
  - 6.2.4.3.1. Market size and forecast, by Product Type
  - 6.2.4.3.2. Market size and forecast, by Application
6.3. Europe
- 6.3.1. Key market trends, growth factors and opportunities
- 6.3.2. Market size and forecast, by Product Type
- 6.3.3. Market size and forecast, by Application
- 6.3.4. Market size and forecast, by country
  - 6.3.4.1. Germany
  - 6.3.4.1.1. Market size and forecast, by Product Type
  - 6.3.4.1.2. Market size and forecast, by Application
  - 6.3.4.2. France
  - 6.3.4.2.1. Market size and forecast, by Product Type
  - 6.3.4.2.2. Market size and forecast, by Application
  - 6.3.4.3. UK
  - 6.3.4.3.1. Market size and forecast, by Product Type
  - 6.3.4.3.2. Market size and forecast, by Application
  - 6.3.4.4. Rest of Europe
  - 6.3.4.4.1. Market size and forecast, by Product Type
  - 6.3.4.4.2. Market size and forecast, by Application
6.4. Asia-Pacific
- 6.4.1. Key market trends, growth factors and opportunities
- 6.4.2. Market size and forecast, by Product Type
- 6.4.3. Market size and forecast, by Application
- 6.4.4. Market size and forecast, by country
  - 6.4.4.1. China
  - 6.4.4.1.1. Market size and forecast, by Product Type
  - 6.4.4.1.2. Market size and forecast, by Application
  - 6.4.4.2. Japan
  - 6.4.4.2.1. Market size and forecast, by Product Type
  - 6.4.4.2.2. Market size and forecast, by Application
  - 6.4.4.3. India
  - 6.4.4.3.1. Market size and forecast, by Product Type
  - 6.4.4.3.2. Market size and forecast, by Application
  - 6.4.4.4. Indonesia
  - 6.4.4.4.1. Market size and forecast, by Product Type
  - 6.4.4.4.2. Market size and forecast, by Application
  - 6.4.4.5. Vietnam
  - 6.4.4.5.1. Market size and forecast, by Product Type
  - 6.4.4.5.2. Market size and forecast, by Application
  - 6.4.4.6. Rest of Asia-Pacific
  - 6.4.4.6.1. Market size and forecast, by Product Type
  - 6.4.4.6.2. Market size and forecast, by Application
6.5. South America
- 6.5.1. Key market trends, growth factors and opportunities
- 6.5.2. Market size and forecast, by Product Type
- 6.5.3. Market size and forecast, by Application
- 6.5.4. Market size and forecast, by country
  - 6.5.4.1. Brazil
  - 6.5.4.1.1. Market size and forecast, by Product Type
  - 6.5.4.1.2. Market size and forecast, by Application
  - 6.5.4.2. Argentina
  - 6.5.4.2.1. Market size and forecast, by Product Type
  - 6.5.4.2.2. Market size and forecast, by Application
  - 6.5.4.3. Chile
  - 6.5.4.3.1. Market size and forecast, by Product Type
  - 6.5.4.3.2. Market size and forecast, by Application
  - 6.5.4.4. Rest Of South America
  - 6.5.4.4.1. Market size and forecast, by Product Type
  - 6.5.4.4.2. Market size and forecast, by Application
6.6. Middle East and Africa
- 6.6.1. Key market trends, growth factors and opportunities
- 6.6.2. Market size and forecast, by Product Type
- 6.6.3. Market size and forecast, by Application
- 6.6.4. Market size and forecast, by country
  - 6.6.4.1. South Africa
  - 6.6.4.1.1. Market size and forecast, by Product Type
  - 6.6.4.1.2. Market size and forecast, by Application
  - 6.6.4.2. Saudi Arabia
  - 6.6.4.2.1. Market size and forecast, by Product Type
  - 6.6.4.2.2. Market size and forecast, by Application
  - 6.6.4.3. UAE
  - 6.6.4.3.1. Market size and forecast, by Product Type
  - 6.6.4.3.2. Market size and forecast, by Application
  - 6.6.4.4. Rest of Middle East And Africa
  - 6.6.4.4.1. Market size and forecast, by Product Type
  - 6.6.4.4.2. Market size and forecast, by Application

CHAPTER 7: COMPETITIVE LANDSCAPE

7.1. Introduction
7.2. Top winning strategies
7.3. Product mapping of top 10 player
7.4. Competitive dashboard
7.5. Competitive heatmap
7.6. Top player positioning, 2019

CHAPTER 8: COMPANY PROFILES

8.1. Henry Company
- 8.1.1. Company overview
- 8.1.2. Key executives
- 8.1.3. Company snapshot
- 8.1.4. Operating business segments
- 8.1.5. Product portfolio
- 8.1.6. Key strategic moves and developments
8.2. GAF.
- 8.2.1. Company overview
- 8.2.2. Key executives
- 8.2.3. Company snapshot
- 8.2.4. Operating business segments
- 8.2.5. Product portfolio
8.3. Soprema
- 8.3.1. Company overview
- 8.3.2. Key executives
- 8.3.3. Company snapshot
- 8.3.4. Operating business segments
- 8.3.5. Product portfolio
8.4. Sika AG
- 8.4.1. Company overview
- 8.4.2. Key executives
- 8.4.3. Company snapshot
- 8.4.4. Operating business segments
- 8.4.5. Product portfolio
- 8.4.6. Business performance
- 8.4.7. Key strategic moves and developments
8.5. Carlisle Companies Inc.
- 8.5.1. Company overview
- 8.5.2. Key executives
- 8.5.3. Company snapshot
- 8.5.4. Operating business segments
- 8.5.5. Product portfolio
- 8.5.6. Business performance
8.6. GCP Applied Technologies Inc.
- 8.6.1. Company overview
- 8.6.2. Key executives
- 8.6.3. Company snapshot
- 8.6.4. Operating business segments
- 8.6.5. Product portfolio
- 8.6.6. Business performance
8.7. RPM International Inc.
- 8.7.1. Company overview
- 8.7.2. Key executives
- 8.7.3. Company snapshot
- 8.7.4. Operating business segments
- 8.7.5. Product portfolio
- 8.7.6. Business performance
8.8. HOLCIM
- 8.8.1. Company overview
- 8.8.2. Key executives
- 8.8.3. Company snapshot
- 8.8.4. Operating business segments
- 8.8.5. Product portfolio
- 8.8.6. Business performance
- 8.8.7. Key strategic moves and developments
8.9. BASF SE
- 8.9.1. Company overview
- 8.9.2. Key executives
- 8.9.3. Company snapshot
- 8.9.4. Operating business segments
- 8.9.5. Product portfolio
- 8.9.6. Business performance
- 8.9.7. Key strategic moves and developments
8.10. Dow
- 8.10.1. Company overview
- 8.10.2. Key executives
- 8.10.3. Company snapshot
- 8.10.4. Operating business segments
- 8.10.5. Product portfolio
- 8.10.6. Business performance