PUBLISHER: AnalystView Market Insights | PRODUCT CODE: 1944450
PUBLISHER: AnalystView Market Insights | PRODUCT CODE: 1944450
Orthopedic Software Market size was valued at US$ 431.20 Million in 2024, expanding at a CAGR of 5.59% from 2025 to 2032.
The Orthopedic Software market is basically about digital tools that help surgeons plan orthopedic surgeries better before they actually go into the operating room. These programs use medical images like X-rays, CT scans, MRI, or EOS scans to create 2D or 3D views of a patient's bones and joints. That way, surgeons can sort of "practice" the procedure ahead of time, like choosing the right implant size, planning bone cuts, checking alignment, and figuring out where screws or plates should go. A lot of these platforms also support patient-specific instrumentation (PSI) and can work alongside navigation systems or surgical robots, which helps make the surgery more accurate and consistent.
Orthopedic Software Market- Market Dynamics
Higher joint replacement volumes and an aging population are pushing demand for orthopedic planning software
Rising orthopedic surgery volumes, especially hip and knee replacements, are a major reason Orthopedic Software is being adopted more widely, since higher caseloads increase the need for faster, more standardized pre-op planning and better implant templating using 2D/3D tools. According to the Agency for Healthcare Research and Quality (AHRQ) Healthcare Cost and Utilization Project (HCUP), U.S. hospitals performed about 2.4 million total knee replacement procedures and about 1.5 million total hip replacement procedures in 2020, showing how large and routine these surgeries have become. Demographics also support the trend because degenerative joint disease and fracture risk rise with age; according to the U.S. Census Bureau, the population aged 65 and older reached about 58 million in 2022 (around 17% of the population), which typically increases demand for orthopedic procedures and imaging-based planning. Cost and efficiency pressure in hospitals adds to the value case for planning tools; according to the Centers for Medicare & Medicaid Services (CMS), U.S. national health expenditures reached $4.5 trillion in 2022, which keeps attention on workflow efficiency and predictable surgical outcomes, areas where digital planning can help reduce avoidable variability.
Orthopedic Software is getting pulled forward mainly because of the large number of joint replacement cases that depend on accurate imaging review and implant templating before surgery. According to the Agency for Healthcare Research and Quality (AHRQ) Healthcare Cost and Utilization Project (HCUP), U.S. hospitals performed about 2.4 million total knee replacement procedures and about 1.5 million total hip replacement procedures in 2020, showing how routine and high-volume these surgeries are. The age profile of the population supports continued demand for these procedures; according to the U.S. Census Bureau, adults aged 65 and older reached about 58 million in 2022 (around 17% of the population), and higher age groups are more likely to need surgery related to degenerative joint issues.
Software adoption is also supported by the operational pressure on care settings to run efficient, predictable surgical workflows, since orthopedic cases are expensive and any delays or revisions can add cost. According to the Centers for Medicare & Medicaid Services (CMS), U.S. national health expenditures reached $4.5 trillion in 2022, keeping hospitals focused on productivity and cost control. Outpatient surgical capacity is also significant, which increases the need for consistent pre-op workflows; according to the Centers for Medicare & Medicaid Services (CMS), Medicare-certified ambulatory surgical centers totaled 6,302 in 2023, showing the scale of settings where planning tools can help standardize preparation and support smoother case execution.
Orthopedic Software Market- Geographical Insights
Orthopedic Software demand tends to be strongest in regions with high surgical volumes, strong access to imaging like CT and X-ray, and hospital investment in digital surgery workflows, which makes North America and Western Europe key markets, with Asia-Pacific building momentum as surgical infrastructure expands. The need for planning tools rises when procedure numbers are high, especially for joint replacement where templating and alignment decisions matter. According to the Agency for Healthcare Research and Quality (AHRQ) Healthcare Cost and Utilization Project (HCUP), U.S. hospitals performed about 2.4 million total knee replacement procedures and about 1.5 million total hip replacement procedures in 2020, showing the scale of surgeries where pre-op planning can directly support efficiency and consistency. Aging demographics also support long-term demand for orthopedic care; according to the U.S. Census Bureau, the population aged 65 and older reached about 58 million in 2022 (around 17% of the population), which typically increases degenerative joint conditions and fracture risk.
The United States Orthopedic Software Market- Country Insights
The United States stands out as the strongest single-country market because of a very large procedure volume and a large base of surgical sites that benefit from standardized planning and repeatable workflows. According to AHRQ HCUP, in 2020, hospitals in the U.S. performed about 2.4 million total knee replacements and about 1.5 million total hip replacements, creating steady demand for software that improves templating, sizing, and planning accuracy. Outpatient capacity also supports adoption outside major hospitals; according to the Centers for Medicare & Medicaid Services (CMS), Medicare-certified ambulatory surgical centers totaled 6,302 in 2023, showing how many locations need efficient pre-op workflows. Cost pressure is also part of the story; according to CMS, national health expenditures in the U.S. reached $4.5 trillion in 2022, keeping focus on tools that support operating room efficiency and reduce avoidable variability.
The market includes a mix of implant companies that bundle planning with procedure workflows, specialist planning and navigation providers, and imaging/enterprise software vendors that connect surgical planning to imaging infrastructure. Major vendors commonly referenced include Stryker, Zimmer Biomet, Johnson & Johnson (DePuy Synthes), Smith+Nephew, and Medtronic, which are often associated with strong hospital relationships and planning tied closely to implant and instrumentation workflows. Brainlab is often associated with planning and navigation capabilities used in complex procedures, while Materialise is commonly linked with 3D planning and patient-specific workflows. Imaging and enterprise platforms such as GE HealthCare, Siemens Healthineers, Philips, and Sectra are typically connected to strengths in imaging visualization, enterprise imaging integration, and data connectivity that support planning across radiology and orthopedic departments.
In June 2025, Zimmer Biomet, an orthopedic medical technology company, announced the launch of new hip, knee, and shoulder technologies in India at ZB Next, held in Mumbai and Delhi, with a portfolio positioned to support the continuum from pre-operative planning to post-operative recovery, including mymobility (an AI-based digital care management platform), ROSA Partial Knee and ROSA Hip robotic-assisted systems, and Signature ONE Version 2 Planning Software, along with multiple implant systems.
In August 2025, restor3d, a company focused on personalized orthopedic solutions that combines AI-driven design software with additive manufacturing and rapid surgical planning, announced a strategic minority investment partnership with Partners Group and reported raising $104 million in total funding, including $65 million of new equity and $39 million from existing shareholders; restor3d also stated that during 2024 it partnered with more than 520 surgeons across 740 hospitals in the U.S., and the proceeds are planned to support product innovation and commercial expansion.
In October 2025, mediCAD Hectec GmbH, a developer of orthopedic and trauma planning software, released mediCAD 8 with an AI-driven workflow and a redesigned user experience aimed at faster and more consistent planning, citing results such as landmark detection with an average deviation of under 2 millimeters and a reduction in segmentation and implant placement time to about 1 minute compared with 2.5 minutes in the previous version (around a 60% reduction), along with new features in the 2D Trauma module and a planned 3D Trauma module.
In September 2025, SMAIO, a French-American company specializing in complex spine surgery solutions combining software and adaptive implants, announced a partnership with Highridge Medical, a privately held spine company, giving Highridge customers access to SMAIO's spinal realignment planning and 3D pre-operative planning capabilities through the open platform KEOPS-4ME, with hospital registration work and FDA 510(k) clearances in progress and first joint solutions expected to be marketed in early 2026.