Gasket and Seals Market, By Product Type, By Sales Channel, By Material Type, By End-use Industry, and By Region

Description

Gasket And Seals Market is estimated to be valued at USD 78,635.9 Mn in 2025 and is expected to reach USD 117,184.6 Mn by 2032, growing at a compound annual growth rate (CAGR) of 5.9% from 2025 to 2032.

Report Coverage		Report Details
Base Year:	2024	Market Size in 2025:	USD 78,635.9 Mn
Historical Data for:	2020 To 2024	Forecast Period:	2020 To 2024
Forecast Period 2025 to 2032 CAGR:	5.90%	2032 Value Projection:	USD 117,184.6 Mn

Gasket and seals are the materials used to prevent the passage of any foreign media through to and fro, the joined object while under compression. A Gasket is a mechanical seal, which fills the space between two or more mating surfaces, in order to prevent leakage. Gaskets allow perfect mating surfaces wherein they can fill irregularities. Gaskets and seals are widely used across all end-use industries. Depending upon the application, different types of gaskets and seals are used among various end-use industries. Spiral wouned, jacketed, kammprofile, and the solid ring is among the key gasket types, while o-ring seals, body seals, mechanical seals, shaft seal, piston seal, etc. are the key seal types used in different applications.

The global gaskets and seals market was valued for USD 74,375.7 Mn in 2021.

Market Dynamics

Leakage from various industrial equipment can result in significant loss of material and indirect loss, in terms of labor and material cost of repair, environmental losses, wasted energy, sales due to downtime, etc. Both direct and indirect loses can incur a negative impact on a company's operation in terms of revenue generation as well as diminishing the brand image in case of industrial accidents and claims for personal injury. Thus, these factors are expected to drive growth of the global gasket and seals market during the forecast period. There are various standards and regulations regarding reducing the environmental impact of leakage and fugitive emissions, have been in development from different government and environmental agencies. For instance, The EPA estimates that approximately 70.4 KT/year of volatile organic compounds (VOC) and 9.4 KT/year of hazardous air pollutants (HAP) are emitted from equipment leaks, which significantly contribute to the formation of ground-level ozone. Moreover, European Environmental Agency, Environmental Protection Agency, etc. are focused on the development of standards to control amount of the leaks. Thus, these factors are expected to propel the market growth in the near future.

Key features of the study

This report provides an in-depth analysis of the Global Gasket and Seals Market and provides market size (USD Mn) and compound annual growth rate (CAGR %) for the forecast period (2022-2030), considering 2021 as the base year.
It elucidates potential revenue opportunities across different segments and explains attractive investment proposition matrix for this market.
This study also provides key insights about market drivers, restraints, opportunities, new product launches or approval, regional outlook, and competitive strategy adopted by leading players.
It profiles leading players in the global Gasket and Seals Market based on the following parameters - regulatory landscape, company overview, financial performance, product portfolio, geographical presence, distribution strategies, key developments and strategies, and future plans.
Key companies covered in the Global Gasket and Seals Market include Banco Products (I) Lt, Dana Incorporated, ElringKlinger AB, Federal-Mogul Holdings Corporation, Freudenberg & Co. KG, Henniges Automotive Holdings Inc., Parker Hannifin Corp., SKF AB, Smiths Group Inc. (John Crane), Trelleborg AB, and Erith Group.
These key market players are focusing on collaboration strategy with other market leaders to innovate and launch new products to meet the increasing needs and requirements of consumers.
Insights from this report would allow marketers and management authorities of companies to make informed decision regarding future product launches, Material Type up gradation, market expansion, and marketing tactics.
The global Gasket and Seals market report caters to various stakeholders in this industry including investors, suppliers, distributors, new entrants, and financial analysts.
Stakeholders would have ease in decision-making through the various strategy matrices used in analyzing the Global Gasket and Seals Market.

Market Segmentation

Global Gaskets and seals Market, By Product Type
- Gaskets
- Jacketed Gaskets
- Solid Gaskets
- Spiral Wound Gaskets
- Kammprofile Gaskets
- Seals
- Static Seals
- Dynamic Seals
Global Gaskets and seals Market, By Sales Channel
- OEM
- Aftermarket
Global Gaskets and seals Market, By Material Type
- Metallic
- Non-Metallic
- Elastomers
- Others
Global Gaskets and seals Market, By End-Use Industry
- Automotive
- Aerospace
- Machinery
- Electronics & Electrical
- Marine & Rail
- Others
Global Gaskets and seals Market, By Region
- North America
- U.S.
- Canada
- Latin America
- Brazil
- Argentina
- Mexico
- Rest of Latin America
- Europe
- Germany
- U.K.
- Spain
- France
- Italy
- Russia
- Rest of Europe
- Asia Pacific
- China
- India
- Japan
- Australia
- South Korea
- ASEAN
- Rest of Asia Pacific
- Middle East
- GCC Countries
- Israel
- Rest of Middle East
- Africa
- South Africa
- North Africa
- Central Africa
Key Players Insights
- ElringKlinger AG
- SKF Group
- Dana Limited
- Trelleborg AB (Sealing Solutions)
- Smiths Group plc / John Crane
- ParkerHannifin Corporation
- Flexitallic Group
- Bruss Sealing Systems GmbH
- Flowserve Corporation

Product Code: CMI3897

1. Research Objectives and Assumptions

Research Objectives
Assumptions
Abbreviations

2. Market Purview

Report Description
- Market Definition and Scope
Executive Summary
- Market Snippet, By Product Type
- Market Snippet, By Sales Channel
- Market Snippet, By Material Type
- Market Snippet, By End-use Industry
- Market Snippet, By Region
Coherent Opportunity Map (COM)

3. Market Dynamics, Regulations, and Trends Analysis

Market Dynamics
- Drivers
- Restraints
- Market Opportunities
Regulatory Scenario
Industry Trend
Merger and Acquisitions
New system Launch/Approvals
Impact of COVID-19 Pandemic

4. Global Gasket and Seals Market, By Product Type, 2020-2032 (USD Mn)

Introduction
- Market Share Analysis, 2022 and 2032 (%)
- Segment Trends
Gaskets
- Introduction
- Market Size and Forecast, 2020-2032, (USD Mn)
  - Jacketed Gaskets
  - Solid Gaskets
  - Spiral Wound Gaskets
  - Kammprofile Gaskets
Seals
- Introduction
- Market Size and Forecast, 2020-2032, (USD Mn)
  - Static Seals
  - Dynamic Seals

5. Global Gasket and Seals Market, By Sales Channel, 2020 - 2032 (USD Mn)

Introduction
- Market Share Analysis, 2022 and 2032 (%)
- Segment Trends
OEM
- Introduction
- Market Size and Forecast, 2020 - 2032, (USD Mn)
- Aftermarket Introduction
- Market Size and Forecast, 2020 - 2032, (USD Mn)
Aftermarket
- Introduction
- Market Size and Forecast, 2020 - 2032, (USD Mn)

6. Global Gasket and Seals Market, By Material Type, 2020-2032 (USD Mn)

Introduction
- Market Share Analysis, 2022 and 2032 (%)
- Segment Trends
Metallic
- Introduction
- Market Size and Forecast, 2020-2032, (USD Mn)
Non-Metallic
- Introduction
- Market Size and Forecast, 2020-2032, (USD Mn)
Sub Segments
- Elastomeric
- Others

7. Global Gasket and Seals Market, By End-use Industry, 2020-2032 (USD Mn)

Introduction
- Market Share Analysis, 2022 and 2032 (%)
- Product Type Trends
Automotive
- Introduction
- Market Size and Forecast, 2020-2032, (USD Mn)
Aerospace
- Introduction
- Market Size and Forecast, 2020-2032, (USD Mn)
Machinery
- Introduction
- Market Size and Forecast, 2020-2032, (USD Mn)
Electronics & Electrical
- Introduction
- Market Size and Forecast, 2020-2032, (USD Mn)
Marine & Rail
- Introduction
- Market Size and Forecast, 2020-2032, (USD Mn)
Others
- Introduction
- Market Size and Forecast, 2020-2032, (USD Mn)

8. Global Gasket and Seals Market, By Region, 2020-2032 (USD Mn)

Introduction
- Market Share Analysis, By Region, 2022 and 2032 (%)
North America
- Regional Trends
- Market Size and Forecast, Product Type, 2020-2032 (USD Mn)
- Market Size and Forecast, By Sales Channel 2020-2032 (USD Mn)
- Market Size and Forecast, Material Type, 2020-2032 (USD Mn)
- Market Size and Forecast, By End-use Industry, 2020-2032 (USD Mn)
- Market Share Analysis, By Country, 2022 and 2032 (%)
  - U.S.
  - Canada
Europe
- Regional Trends
- Market Size and Forecast, Product Type, 2020-2032 (USD Mn)
- Market Size and Forecast, By Sales Channel 2020-2032 (USD Mn)
- Market Size and Forecast, Material Type, 2020-2032 (USD Mn)
- Market Size and Forecast, By End-use Industry, 2020-2032 (USD Mn)
- Market Share Analysis, By Country, 2022 and 2032 (%)
  - U.K.
  - Germany
  - France
  - Italy
  - Russia
  - Rest of Europe
Asia Pacific
- Regional Trends
- Market Size and Forecast, Product Type, 2020-2032 (USD Mn)
- Market Size and Forecast, By Sales Channel 2020-2032 (USD Mn)
- Market Size and Forecast, Material Type, 2020-2032 (USD Mn)
- Market Size and Forecast, By End-use Industry, 2020-2032 (USD Mn)
- Market Share Analysis, By Country, 2022 and 2032 (%)
  - China
  - India
  - Japan
  - ASEAN
  - Australia
  - South Korea
  - Rest of Asia Pacific
Latin America
- Regional Trends
- Market Size and Forecast, Product Type, 2020-2032 (USD Mn)
- Market Size and Forecast, By Sales Channel 2020-2032 (USD Mn)
- Market Size and Forecast, Material Type, 2020-2032 (USD Mn)
- Market Size and Forecast, By End-use Industry, 2020-2032 (USD Mn)
- Market Share Analysis, By Country, 2022 and 2032 (%)
  - Brazil
  - Argentina
  - Mexico
  - Rest of Latin America
Middle East and Africa
- Regional Trends
- Market Size and Forecast, Product Type, 2020-2032 (USD Mn)
- Market Size and Forecast, By Sales Channel 2020-2032 (USD Mn)
- Market Size and Forecast, Material Type, 2020-2032 (USD Mn)
- Market Size and Forecast, By End-use Industry, 2020-2032 (USD Mn)
- Market Share Analysis, By Country, 2022 and 2032 (%)
  - South Africa
  - GCC Countries
  - Rest of the Middle East and Africa

9. Competitive Landscape

Company Profiles
- ElringKlinger AG
  - Company Overview
  - Product Portfolio
  - Financial Performance
  - Key Strategies
  - Recent Developments/ Updates
- SKF Group
  - Company Overview
  - Product Portfolio
  - Financial Performance
  - Key Strategies
  - Recent Developments/Updates
- Flowserve Corporation
  - Company Overview
  - Product Portfolio
  - Financial Performance
  - Key Strategies
  - Recent Developments/Updates
- Dana Limited
  - Company Overview
  - Product Portfolio
  - Financial Performance
  - Key Strategies
  - Recent Developments/Updates
- Trelleborg AB (Sealing Solutions)
  - Company Overview
  - Product Portfolio
  - Financial Performance
  - Key Strategies
  - Recent Developments/Updates
- Smiths Group plc / John Crane
  - Company Overview
  - Product Portfolio
  - Financial Performance
  - Key Strategies
  - Recent Developments/Updates
- ParkerHannifin Corporation
  - Company Overview
  - Product Portfolio
  - Financial Performance
  - Key Strategies
  - Recent Developments/Updates
- Flexitallic Group
  - Company Overview
  - Product Portfolio
  - Financial Performance
  - Key Strategies
  - Recent Developments/Updates
- Bruss Sealing Systems GmbH
  - Company Overview
  - Product Portfolio
  - Financial Performance
  - Key Strategies
  - Recent Developments/Updates
  - Analyst Views

10. Section

References
Research Methodology
About us and Sales Contact