The Global Market for Advanced Fire-retardant and Fire-resistant Coatings and Materials 2027-2037

Table of Contents

1 Executive Summary

• 1.1 Market Overview and Definition
• 1.2 Why the Market Is Changing: Five Structural Drivers
• 1.3 Market Size and Growth 2026–2037
• 1.4 Market by Product Segment
• 1.5 Market by End-Use Application
• 1.6 Regional Market Summary
• 1.7 Key Technology Trends
• 1.8 Regulatory Catalysts 2026–2030
• 1.9 Competitive Landscape Summary
• 1.10 Recent Industry Developments 2025–2026
• 1.11 Market Challenges and Restraints
• 1.12 Future Markets Outlook: Opportunities 2027–2037

2 Introduction

• 2.1 Fire Science Fundamentals
  • 2.1.1 The Fire Triangle/Tetrahedron and Stages of Fire Development
  • 2.1.2 Cellulosic vs. Hydrocarbon vs. Jet-Fire vs. Wildfire Exposure Curves
• 2.2 Fire-Retardant vs. Fire-Resistant: Definitions and Distinctions
• 2.3 Mechanisms of Fire Retardancy
  • 2.3.1 Condensed-Phase (Char-Forming, Intumescence, Ceramification)
  • 2.3.2 Gas-Phase (Radical Quenching, Dilution)
  • 2.3.3 Endothermic Cooling and Heat-Sink Mechanisms
  • 2.3.4 Physical Barrier and Thermal Insulation Mechanisms
• 2.4 Classification of Advanced Fire-Retardant and Fire-Resistant Coatings and Materials
• 2.5 Historical Evolution of Fire Protection Materials, 1900–2026
• 2.6 Fire Losses and the Economic Case for Passive Fire Protection
• 2.7 The Fire Protection Value Chain
• 2.8 Technology Readiness Assessment
• 2.9 Report Scope and Methodology Summary

3 Regulatory Landscape and Standards

• 3.1 Overview of the Global Regulatory Framework
• 3.2 Building and Construction Codes
  • 3.2.1 International Building Code (IBC 2021/2024) and Mass Timber Types IV-A/B/C
  • 3.2.2 EU Construction Products Regulation (CPR, revised 2024) and Euroclass Reaction-to-Fire
  • 3.2.3 UK Building Safety Act 2022 and Post-Grenfell Requirements
  • 3.2.4 China GB 8624 and GB 14907; Asia-Pacific Codes
• 3.3 Wildland–Urban Interface (WUI) Regulations
  • 3.3.1 California Chapter 7A, Zone 0 Ember-Resistant Zone Rules, ASTM E2886/E2957/E2632
  • 3.3.2 Australia AS 3959 BAL Ratings; Canada and Europe
• 3.4 Electric Vehicle Battery Safety Regulations
  • 3.4.1 China GB 38031-2025 ("no fire, no explosion", mandatory July 2026)
  • 3.4.2 UN ECE R100-05 (new types from Sept 2027) and UN GTR 20 Phase
  • 3.4.3 US FMVSS 305a; India AIS-156; Korea and Japan
• 3.5 Energy Storage System Standards (UL 9540, UL 9540A, NFPA 855, IEC 62933, GB/T 36276)
• 3.6 Transportation Sector Standards (FAR 25.853/25.856, EN 45545-2, IMO FTP Code, FMVSS 302)
• 3.7 Oil & Gas and Industrial Standards (UL 1709, ISO 22899 jet-fire, NORSOK M-501, API 2218)
• 3.8 Electrical, Electronics and Cable Standards (UL 94, IEC 60332, EN 50575 CPR cable classes, UL 2196)
• 3.9 Protective Clothing Standards (NFPA 1970/2112, EN ISO 11612, EN 469)
• 3.10 Chemical Regulations Affecting Fire Retardants
  • 3.10.1 Halogenated Flame Retardant Restrictions (Stockholm Convention: decaBDE, HBCDD, Dechlorane Plus; EU REACH; US state laws)
  • 3.10.2 PFAS Restrictions and Impact on Fire Protection (EU universal PFAS restriction, AFFF phase-outs)
  • 3.10.3 Antimony Trioxide and Borates
• 3.11 Testing and Certification Infrastructure (UL Solutions, Intertek, BRE, FM Approvals, Exova/Element; OEM in-house labs incl. Saint-Gobain Northborough MA lab opened Jul 2026)

4 Fire-Retardant and Fire-Resistant Coatings

• 4.1 Overview of Coatings Technologies
• 4.2 Thin-Film Intumescent Coatings (Cellulosic)
  • 4.2.1 Chemistry: Acid Source, Carbon Source, Blowing Agent, Binder (APP/PER/MEL)
  • 4.2.2 Water-Borne vs. Solvent-Borne Systems
  • 4.2.3 Performance: 30–120 Minute Ratings, DFT Requirements, Section Factors
  • 4.2.4 Off-Site/Shop Application and Fast-Cure Trends
  • 4.2.5 Market Size and Forecast
• 4.3 Thick-Film Epoxy Intumescent Coatings (Hydrocarbon and Jet-Fire)
  • 4.3.1 Chemistry and Mesh Reinforcement
  • 4.3.2 Hydrocarbon, Jet-Fire and Cryogenic Spill Protection (LNG)
  • 4.3.3 Market Size and Forecast
• 4.4 Cementitious Coatings and Spray-Applied Fire-Resistive Materials (SFRM)
  • 4.4.1 Gypsum-, Portland- and Vermiculite-Based Formulations
  • 4.4.2 Density Classes and Application Methods
  • 4.4.3 Market Size and Forecast
• 4.5 Fire-Retardant Coatings for Wood, Mass Timber and Other Substrates
  • 4.5.1 Clear and Pigmented FR Coatings; Pressure Impregnation vs. Surface Coatings
  • 4.5.2 Mass Timber (CLT, Glulam) Encapsulation and Char Protection
  • 4.5.3 Coatings for Composites, Plastics and Foams
  • 4.5.4 Market Size and Forecast
• 4.6 Wildfire-Defence Exterior Coatings, Gels and Structure Retardants
  • 4.6.1 Wildfire Threat Vectors: Embers, Radiant Heat, Direct Flame
  • 4.6.2 Pre-Applied Retardant Coatings for Roofs, Siding, Decks
  • 4.6.3 Rapid-Deploy Gels and Sprays (Altek Wildfire Guardian / Zentek GraphGel expandable-graphite gel; Barricade, Phos-Chek, FireIce)
  • 4.6.4 Intumescent Sheathing and Wall Assemblies for Homes (Arclin Firepoint)
  • 4.6.5 Integrated Structure-Defence Systems (Fire Proof Builder; exterior sprinklers + materials)
  • 4.6.6 Insurance and Mitigation Incentives (IBHS Wildfire Prepared Home)
  • 4.6.7 Market Size and Forecast
• 4.7 Fire-Retardant Textile, Cable and Back-Coatings
  • 4.7.1 Textile Back-Coatings and Finishes (Phosphorus, Nitrogen, Halogen-Free)
  • 4.7.2 Cable Coatings and Fire-Stop Cable Sprays
  • 4.7.3 Market Size and Forecast
• 4.8 Battery and Electronics Fire-Protective Coatings
  • 4.8.1 Ceramic, Silicone and Intumescent Coatings for Battery Lids, Housings and Busbars
  • 4.8.2 Dielectric Coatings and Spray-Applied Thermal Barriers
  • 4.8.3 Coatings for Electronics, PCBs and Data Centre Infrastructure
  • 4.8.4 Market Size and Forecast
• 4.9 Nano-Enhanced Fire-Retardant Coatings (graphene, expandable graphite, nanoclays, CNTs, MXenes, silica)
• 4.10 Bio-Based and Sustainable Fire-Retardant Coatings (lignin, phytic acid, chitosan, DNA/casein, tannins)
• 4.11 Coatings Cost Structure and Pricing Analysis

5 Advanced Fire-Resistant and Fire-Retardant Materials

• 5.1 Overview of Advanced Materials
• 5.2 Aerogels
  • 5.2.1 Silica, Polymer, Carbon and Hybrid Aerogels; Fibre-Reinforced Blankets
  • 5.2.2 Production Processes (Supercritical vs. Ambient-Pressure Drying)
  • 5.2.3 Fire Performance and Thermal-Runaway Barrier Use
  • 5.2.4 Production Capacity and Supply (China Capacity Build-Out)
  • 5.2.5 Market Size and Forecast
• 5.3 Mica Papers, Sheets and Laminates
  • 5.3.1 Muscovite vs. Phlogopite; Mica Paper and Rigid/Flexible Laminates
  • 5.3.2 Supply Chain (India, Madagascar, China; Responsible Sourcing)
  • 5.3.3 Market Size and Forecast
• 5.4 Ceramic-Fibre, AES Wool and Advanced Mineral Fire Boards and Papers
  • 5.4.1 RCF, AES, Polycrystalline Wool; Classification and Health Regulation
  • 5.4.2 Calcium Silicate, Vermiculite, Magnesium Oxide and Gypsum-Based Fire Boards
  • 5.4.3 Market Size and Forecast
• 5.5 High-Performance Fire-Resistant Fibres and Textiles
  • 5.5.1 Meta-Aramid, Para-Aramid, PBI, PBO, Oxidised PAN, Modacrylic, FR Viscose, Basalt and Glass
  • 5.5.2 Protective Clothing, Transportation and Industrial Textiles
  • 5.5.3 Market Size and Forecast
• 5.6 Fire-Retardant Composites and Panels
  • 5.6.1 Phenolic, Silicone, Benzoxazine, Cyanate Ester and FR Epoxy Composites
  • 5.6.2 Circular and Recyclable Fireproof Composites (CFP Composites FR.10/FR.3D/FR.M; DEECOM Recycling)
  • 5.6.3 FR Thermoplastics for Battery Enclosures (PC, PP, PA, PPS Compounds; SABIC, Covestro, Celanese, BASF, LG Chem)
  • 5.6.4 Fire-Resistant Building Panels and Boards (Xeriant NEXBOARD Multilayer Composite, US Patent 12,679,047; MgO Boards; FR OSB/Plywood)
• 5.7 Encapsulant Foams, Potting Compounds and Gap Fillers
• 5.8 FR Composites, Panels, Foams & Encapsulants - Market Size and Forecast
• 5.9 Firestop Systems
  • 5.9.1 Sealants, Mastics and Sprays; Collars and Wraps; Pillows, Blocks and Boards
  • 5.9.2 Penetration Seals, Joint Systems and Perimeter Barriers (UL 1479, UL 2079, ASTM E2307, EN 1366)
  • 5.9.3 Data-Centre and High-Rise Drivers
  • 5.9.4 Market Size and Forecast
• 5.10 Advanced Halogen-Free Fire-Retardant Additives and Synergists
  • 5.10.1 Phosphorus-Based (APP, DOPO, Phosphinates, Phosphonates, RDP/BDP)
  • 5.10.2 Nitrogen-Based (Melamine Cyanurate, Melamine Polyphosphate)
  • 5.10.3 Metal Hydroxides (ATH, MDH) - Surface-Treated/Nano Grades
  • 5.10.4 Expandable Graphite
  • 5.10.5 Nanomaterials: Graphene, CNTs, Nanoclays, LDH, MXenes, POSS, Boron Nitride
  • 5.10.6 Bio-Based Additives (Lignin, Phytic Acid, Chitosan, Cellulose Nanocrystals)
  • 5.10.7 Market Size and Forecast
• 5.11 Phase Change Materials and Other Emerging Materials
• 5.12 Materials Informatics and AI-Driven Discovery of Fire-Retardant Materials

6 EV Battery and Energy Storage Fire Protection

• 6.1 Thermal Runaway in Lithium-Ion Batteries
  • 6.1.1 Causes and Stages of Thermal Runaway
  • 6.1.2 Gas Generation and Venting
  • 6.1.3 EV and BESS Fire Incidents and Recalls 2020–2026
• 6.2 Impact of Cell Chemistry (NMC, LFP, LMFP, Na-ion, Solid-State) on Fire Protection
• 6.3 Cell Format and Pack Architecture
  • 6.3.1 Cylindrical, Prismatic and Pouch Cells - Format Shares
  • 6.3.2 Cell-to-Pack, Cell-to-Body and Large-Format Cells
  • 6.3.3 Pack-Level Protection Strategies (lid barriers, vent channels, inter-cell barriers)
• 6.4 Fire Protection Materials for Batteries
  • 6.4.1 Inter-Cell Barriers (aerogel, mica, ceramic paper, compression pads)
  • 6.4.2 Pack-Lid and Enclosure Protection (mica, coatings, FR composites)
  • 6.4.3 Encapsulant Foams (cylindrical packs)
  • 6.4.4 Coatings and Thermal-Runaway Barrier Sprays
  • 6.4.5 FR Polymers and Composite Enclosures
• 6.5 Material Benchmarking
• 6.6 Material Testing for Thermal Runaway (UL 2596, UL BETR, torch-and-grit, nail penetration)
• 6.7 Market Forecast: EV Batteries
• 6.8 Market Forecast: Stationary Energy Storage
  • 6.8.1 BESS Fire Protection Requirements and Containerised System Design
• 6.9 Immersion Cooling and Its Impact on Fire Protection Materials
• 6.10 Outlook: Na-ion, Solid-State and the Future of Battery Fire Protection

7 End-Use Markets

• 7.1 Building and Construction
  • 7.1.1 Structural Steel Fire Protection
  • 7.1.2 Mass Timber and Engineered Wood
  • 7.1.3 Facades, Cladding and Insulation (Post-Grenfell Remediation)
  • 7.1.4 Residential Construction and Wildfire-Resilient Homes
  • 7.1.5 Commercial, High-Rise and Critical Infrastructure (Tunnels)
  • 7.1.6 Retrofit and Renovation
• 7.2 Oil, Gas, Petrochemical and LNG
  • 7.2.1 Offshore Platforms and FPSOs
  • 7.2.2 Onshore Refineries, Petrochemical Plants and LNG Terminals
• 7.3 Electric Vehicles and E-Mobility (summary; cross-reference Chapter 6)
• 7.4 Stationary Energy Storage
• 7.5 Aerospace, Rail, Marine and Conventional Automotive
  • 7.5.1 Aerospace and Aviation (Cabin Interiors, Nacelles, eVTOL Batteries)
  • 7.5.2 Rail (EN 45545)
  • 7.5.3 Marine and Shipbuilding (IMO, Electric Ferries)
  • 7.5.4 Conventional Automotive Interiors and Under-Hood
• 7.6 Electrical, Electronics, Cables and Data Centres
  • 7.6.1 Consumer Electronics and E&E Housings
  • 7.6.2 Wire & Cable (CPR Classes, LSZH)
  • 7.6.3 Data Centres (AI Build-Out, Firestop, Cable Trays, Battery Rooms)
  • 7.6.4 Busbars and High-Voltage Insulation
• 7.7 Protective Clothing, PPE and Defence
• 7.8 Industrial, Power Generation and Other (Nuclear, Renewables, Warehouses, Mining)

8 Global Market Forecasts 2024–2037

• 8.1 Forecast Methodology and Assumptions
  • 8.1.1 Modelling approach
  • 8.1.2 Key assumptions
  • 8.1.3 Reconciliation with third-party estimates
• 8.2 Total Market 2024–2037
• 8.3 Market by Product Segment
• 8.4 Coatings vs. Materials
• 8.5 Volume Demand (kilotonnes)
• 8.6 Pricing Trends
• 8.7 Market by End-Use Application
• 8.8 Market by Region
• 8.9 Scenario Analysis

9 Regional Market Analysis

• 9.1 North America
  • 9.1.1 United States
  • 9.1.2 Canada
  • 9.1.3 Mexico
• 9.2 Europe
  • 9.2.1 Germany, France, UK, Italy, Nordics, Benelux, Spain
  • 9.2.2 Regulatory and Industrial Drivers Across Europe
• 9.3 Asia-Pacific
  • 9.3.1 China
  • 9.3.2 Japan
  • 9.3.3 South Korea
  • 9.3.4 India
  • 9.3.5 Rest of Asia-Pacific (Australia, SE Asia)
• 9.4 Middle East and Africa
• 9.5 Latin America

10 Competitive Landscape

• 10.1 Market Structure and Concentration
• 10.2 Estimated Market Shares: Intumescent and Passive Fire Protection Coatings
• 10.3 Estimated Market Shares: EV Battery Fire Protection Materials
• 10.4 Mergers, Acquisitions and Strategic Partnerships 2022–2026
  • 10.4.1 Building-Materials Consolidation
  • 10.4.2 Coatings Majors: Reshaping Rather Than Buying Fire Protection
  • 10.4.3 Electrification Specialists: Capital Discipline After the EV Reset
  • 10.4.4 Wildfire and Circular-Materials Partnerships
• 10.5 Start-Up and Venture Funding Landscape
• 10.6 Capacity Expansions and Investments
  • 10.6.1 Testing and Certification Capacity as a Competitive Asset
  • 10.6.2 Aerogel and Mica Capacity: A Structural Oversupply
  • 10.6.3 Coatings Capacity Follows Infrastructure Demand
• 10.7 Patent Landscape
• 10.8 Business Models: Product Sales, Applied Systems, Certification-Led Specification
• 10.9 Barriers to Entry

11 Technology Roadmap and Future Outlook 2027–2037

• 11.1 Technology Roadmap
• 11.2 Sustainability: Halogen-Free, PFAS-Free, Low-VOC, Bio-Based and Recyclable Solutions
• 11.3 Digitalisation: AI-Formulated Coatings, Digital Fire Engineering, DFT Monitoring
• 11.4 Climate Adaptation and Wildfire Resilience
• 11.5 Electrification: Batteries, Data Centres and Grid
• 11.6 Risks and Uncertainties
• 11.7 Strategic Recommendations for Suppliers, Investors and End Users

12 Company Profiles (127 company profiles)

13 Appendices

• 13.1 Research Methodology
  • 13.1.1 Primary Research
  • 13.1.2 Secondary Research
  • 13.1.3 Market Model
  • 13.1.4 Limitations
• 13.2 Fire Testing Standards and Protocols
• 13.3 List of Abbreviations
• 13.4 Glossary of Terms

14 References

List of Tables

• Table 1. Scope of the report: product segments and inclusions/exclusions.
• Table 2. Key market metrics, 2026–2037.
• Table 3. Key technology trends and their market impact, 2027–2037.
• Table 4. Regulatory catalysts and effective dates.
• Table 5. Competitive structure by segment cluster.
• Table 6. Selected industry developments, 2025–2026.
• Table 7. Market drivers and restraints.
• Table 8. Highest-growth opportunities ranked by 2037 value and CAGR.
• Table 9. Fire exposure scenarios and their protection implications.
• Table 10. Fire-retardant vs. fire-resistant vs. fire-proof vs. non-combustible: definitions and test basis.
• Table 11. Fire-retardant mechanisms, representative chemistries and materials.
• Table 12. Classification of products covered in this report (14 product segments).
• Table 13. Evolution timeline of fire protection materials.
• Table 14. Selected global fire loss statistics (wildfire, building, EV/BESS, industrial).
• Table 15. Technology readiness levels (TRL) of fire protection technologies, 2026 and expected 2032.
• Table 16. Global fire safety regulatory framework by sector.
• Table 17. Euroclass reaction-to-fire classes and typical fire protection products.
• Table 18. Key building fire standards by region.
• Table 19. WUI regulations and test methods.
• Table 20. EV battery thermal-runaway regulations and timelines, 2020–2030.
• Table 21. BESS fire safety standards.
• Table 22. Transportation fire standards by mode.
• Table 23. Oil, gas and industrial fire protection standards.
• Table 24. Electrical and cable fire classification standards.
• Table 25. Protective clothing fire standards.
• Table 26. Restricted and phased-out flame retardant chemistries and regulatory status.
• Table 27. Major fire testing and certification bodies and facilities.
• Table 28. Comparison of fire-protective coating technologies.
• Table 29. Global fire-retardant and fire-resistant coatings market by type, 2026–2037 (US$ million).
• Table 30. Water-borne vs. solvent-borne vs. epoxy thin-film intumescent systems.
• Table 31. Thin-film intumescent product benchmarking (major commercial products).
• Table 32. Thin-film intumescent coatings (cellulosic): market by region, 2026–2037 (US$ million).
• Table 33. Epoxy intumescent product benchmarking.
• Table 34. Thick-film epoxy intumescent coatings (hydrocarbon/jet-fire): market by region, 2026–2037 (US$ million).
• Table 35. Cementitious/SFRM product properties and ratings.
• Table 36. Cementitious coatings & spray-applied fire-resistive materials (SFRM): market by region, 2026–2037 (US$ million).
• Table 37. FR coatings for wood and timber: products and classifications.
• Table 38. Fire-retardant coatings for wood, timber & other substrates: market by region, 2026–2037 (US$ million).
• Table 39. Wildfire structure-protection coatings, gels and products.
• Table 40. Wildfire-defence exterior coatings, gels & structure retardants: market by region, 2026–2037 (US$ million).
• Table 41. Textile and cable FR coating technologies.
• Table 42. Fire-retardant textile, cable & back-coatings: market by region, 2026–2037 (US$ million).
• Table 43. Battery fire-protective coatings: suppliers, chemistry, temperature rating, dielectric strength.
• Table 44. Battery & electronics fire-protective coatings: market by region, 2026–2037 (US$ million).
• Table 45. Nanomaterial additives in fire-retardant coatings: mechanism and performance gains.
• Table 46. Bio-based fire-retardant coating chemistries and development status.
• Table 47. Coatings cost per m² by rating and technology.
• Table 48. Average selling price and volume of fire-protective coatings by segment, 2026.
• Table 49. Benchmarking of advanced fire-resistant materials (indicative ranges).
• Table 50. Global advanced fire-resistant materials market by type, 2026–2037 (US$ million).
• Table 51. Aerogel fire-protection products and suppliers.
• Table 52. Global aerogel production capacity by company (status and indicative scale, 2026).
• Table 53. Aerogel fire & thermal-runaway barriers: market by region, 2026–2037 (US$ million).
• Table 54. Mica fire-protection product specifications and suppliers.
• Table 55. Mica papers, sheets & laminates: market by region, 2026–2037 (US$ million).
• Table 56. Ceramic and mineral fire-protection materials: properties and suppliers.
• Table 57. Ceramic-fibre, AES & advanced mineral fire boards/papers: market by region, 2026–2037 (US$ million).
• Table 58. FR fibre properties (LOI, decomposition temperature, tenacity, price).
• Table 59. High-performance fire-resistant fibres & textiles: market by region, 2026–2037 (US$ million).
• Table 60. Fire-retardant composite and panel products.
• Table 61. Encapsulant foams and potting compounds for fire protection.
• Table 62. Fire-retardant composites, panels, foams & encapsulants: market by region, 2026–2037 (US$ million).
• Table 63. Firestop product categories, standards and leading suppliers.
• Table 64. Firestop systems (sealants, wraps, collars, sprays, boards): market by region, 2026–2037 (US$ million).
• Table 65. Halogen-free FR additive classes: loading, mechanism, polymers, suppliers.
• Table 66. Nanomaterial-based FR additives: performance vs. conventional.
• Table 67. Advanced halogen-free FR additives & synergists: market by region, 2026–2037 (US$ million).
• Table 68. Emerging fire-protection materials: TRL and commercialisation outlook.
• Table 69. Stages of thermal runaway and temperature ranges.
• Table 70. Selected EV and BESS fire incidents and recalls.
• Table 71. Cell chemistry thermal stability and fire-protection implications.
• Table 72. Cell format share and preferred fire-protection materials.
• Table 73. Pack-level protection strategies and associated materials.
• Table 74. Battery fire-protection materials: application location, OEM use cases, suppliers.
• Table 75. Thermal conductivity, density, dielectric strength and maximum temperature by material.
• Table 76. Price per kg, per m² and per kWh by material.
• Table 77. Key battery fire-protection test methods and standards.
• Table 78. EV and stationary storage battery demand and fire-protection material intensity, 2025–2037.
• Table 79. EV battery fire-protection material demand by material type, 2026–2037 (kilotonnes).
• Table 80. EV battery fire-protection market by material type, 2026–2037 (US$ million).
• Table 81. EV battery fire-protection material demand by vehicle type, 2026–2037 (kilotonnes).
• Table 82. EV fire-protection market structure, 2026 vs 2037.
• Table 83. BESS fire-protection requirements and material responses.
• Table 84. Stationary energy storage fire-protection market by material type, 2026–2037 (US$ million).
• Table 85. Stationary energy storage fire-protection material demand by material type, 2026–2037 (kilotonnes).
• Table 86. Impact of immersion cooling on battery fire-protection materials.
• Table 87. Battery fire-protection outlook by technology, 2027–2037.
• Table 88. End-use markets at a glance: fire scenarios, governing standards and primary product segments.
• Table 89. Structural steel fire protection: technology selection by building context.
• Table 90. Post-Grenfell remediation in England: status at end-July 2026.
• Table 91. Wildfire-resilient home construction: regulatory and market drivers.
• Table 92. Fire protection material requirements by building type.
• Table 93. Building & construction: market by product segment, 2026–2037 (US$ million).
• Table 94. Hydrocarbon fire protection requirements by facility type.
• Table 95. Oil, gas, petrochemical & LNG: market by product segment, 2026–2037 (US$ million).
• Table 96. OEM adoption of battery fire-protection materials (selected OEM/model/material).
• Table 97. Electric vehicles & e-mobility: market by product segment, 2026–2037 (US$ million).
• Table 98. Stationary energy storage (BESS): market by product segment, 2026–2037 (US$ million).
• Table 99. Transportation fire protection applications and materials.
• Table 100. Aerospace, rail, marine & conventional automotive: market by product segment, 2026–2037 (US$ million).
• Table 101. Data centre fire protection material use.
• Table 102. Electrical, electronics, cables & data centres: market by product segment, 2026–2037 (US$ million).
• Table 103. Protective clothing, PPE & defence: market by product segment, 2026–2037 (US$ million).
• Table 104. Industrial, power generation & other: market by product segment, 2026–2037 (US$ million).
• Table 105. Forecast methodology steps.
• Table 106. Key forecast assumptions.
• Table 107. Reconciliation with selected third-party market estimates.
• Table 108. Global market for advanced fire-retardant and fire-resistant coatings and materials, 2024–2037 (US$ million).
• Table 109. Global market by product segment, 2026–2037 (US$ million).
• Table 110. Market share by product segment, 2026, 2031 and 2037.
• Table 111. Segments ranked by absolute increment, 2026–2037.
• Table 112. Global fire-retardant and fire-resistant coatings market by type, 2026–2037 (US$ million).
• Table 113. Global advanced fire-resistant materials market by type, 2026–2037 (US$ million).
• Table 114. Global demand by product segment, 2026–2037 (kilotonnes).
• Table 115. Average selling price by product segment, 2026–2037 (US$/kg).
• Table 116. Principal price drivers by segment group.
• Table 117. Global market by end-use application, 2026–2037 (US$ million).
• Table 118. Market share by end-use application, 2026, 2031 and 2037.
• Table 119. Growth decomposition by application, 2026–2037.
• Table 120. Global market by region, 2026–2037 (US$ million).
• Table 121. Regional market share, 2026, 2031 and 2037.
• Table 122. Market by product segment and region, 2026 (US$ million).
• Table 123. Market by product segment and region, 2037 (US$ million).
• Table 124. Market scenarios: low, base and high cases, 2026–2037 (US$ million).
• Table 125. Scenario assumptions.
• Table 126. Regional market overview, 2026 and 2037.
• Table 127. Selected US demand indicators for fire-protection materials.
• Table 128. North America market by country, 2026–2037 (US$ million).
• Table 129. North America market by end-use application, 2026–2037 (US$ million).
• Table 130. North America market by product segment, 2026–2037 (US$ million).
• Table 131. European country drivers for fire-protection demand.
• Table 132. Europe market by country/sub-region, 2026–2037 (US$ million).
• Table 133. Europe market by end-use application, 2026–2037 (US$ million).
• Table 134. Europe market by product segment, 2026–2037 (US$ million).
• Table 135. Asia-Pacific country drivers for fire-protection demand.
• Table 136. Asia-Pacific market by country, 2026–2037 (US$ million).
• Table 137. Asia-Pacific market by end-use application, 2026–2037 (US$ million).
• Table 138. Asia-Pacific market by product segment, 2026–2037 (US$ million).
• Table 139. Middle East & Africa market by end-use application, 2026–2037 (US$ million).
• Table 140. Middle East & Africa market by product segment, 2026–2037 (US$ million).
• Table 141. Latin American demand drivers.
• Table 142. Latin America market by end-use application, 2026–2037 (US$ million).
• Table 143. Latin America market by product segment, 2026–2037 (US$ million).
• Table 144. Leading suppliers by product segment, 2026.
• Table 145. Estimated supplier shares, passive fire protection coatings (C1+C2+C3), 2026.
• Table 146. Estimated supplier shares, EV battery fire-protection materials, 2026.
• Table 147. M&A and partnerships in fire protection coatings and materials, 2022–2026.
• Table 148. Venture funding and capital sources for fire-protection start-ups and scale-ups, selected.
• Table 149. Major capacity expansions and facility investments, 2024–2026.
• Table 150. Patent activity by technology area and leading assignees (qualitative/indicative).
• Table 151. Business models in fire protection coatings and materials.
• Table 152. Barriers to entry by segment group.
• Table 153. Technology roadmap milestones by segment.
• Table 154. Risk matrix: probability vs. impact.
• Table 155. Strategic recommendations by stakeholder.
• Table 156. Report scope and methodology summary.
• Table 157. Fire test standards reference table.
• Table 158. Abbreviations.
• Table 159. Glossary of terms.

List of Figures

• Figure 1. Global market for advanced fire-retardant and fire-resistant coatings and materials, 2024–2037 (US$ billion).
• Figure 2. Segment attractiveness: 2026 market size vs. 2027–2037 CAGR (bubble size = 2037 market).
• Figure 3. Global market by end-use application, 2024–2037 (US$ billion).
• Figure 4. Global market by region, 2024–2037 (US$ billion).
• Figure 5. Fire tetrahedron and points of intervention by retardant mechanism.
• Figure 6. Standard time–temperature curves: ISO 834/ASTM E119 cellulosic, UL 1709/EN 1363-2 hydrocarbon, wildfire ember/radiant exposure (illustrative).
• Figure 7. Market map: coatings vs. materials by end-use.
• Figure 8. Value chain: raw materials → additives/fibres → formulators → applicators/OEMs → certification → end users.
• Figure 9. Regulatory timeline for EV battery thermal-runaway requirements, 2020–2032.
• Figure 10. Timeline of restrictions on halogenated flame retardants and PFAS in fire protection, 2004–2030.
• Figure 11. Fire-retardant and fire-resistant coatings market by type, 2024–2037 (US$ billion).
• Figure 12. Intumescent char formation mechanism.
• Figure 13. Thin-film intumescent coatings (cellulosic): market by region, 2024–2037 (US$ billion).
• Figure 14. Thick-film epoxy intumescent coatings (hydrocarbon/jet-fire): market by region, 2024–2037 (US$ billion).
• Figure 15. Cementitious coatings & spray-applied fire-resistive materials (SFRM): market by region, 2024–2037 (US$ billion).
• Figure 16. Fire-retardant coatings for wood, timber & other substrates: market by region, 2024–2037 (US$ billion).
• Figure 17. Wildfire-defence exterior coatings, gels & structure retardants: market by region, 2024–2037 (US$ billion).
• Figure 18. Fire-retardant textile, cable & back-coatings: market by region, 2024–2037 (US$ billion).
• Figure 19. Battery & electronics fire-protective coatings: market by region, 2024–2037 (US$ billion).
• Figure 20. Indicative installed cost per m² of fire-protective coatings by technology and rating, 2026.
• Figure 21. Maximum service temperature versus thermal conductivity of fire-protection materials.
• Figure 22. Advanced fire-resistant materials market by type, 2024–2037 (US$ billion).
• Figure 23. Aerogel insulation mechanism in a battery cell-to-cell barrier.
• Figure 24. Aerogel fire & thermal-runaway barriers: market by region, 2024–2037 (US$ billion).
• Figure 25. Mica papers, sheets & laminates: market by region, 2024–2037 (US$ billion).
• Figure 26. Ceramic-fibre, AES & advanced mineral fire boards/papers: market by region, 2024–2037 (US$ billion).
• Figure 27. Limiting oxygen index versus decomposition temperature of fire-resistant fibres.
• Figure 28. High-performance fire-resistant fibres & textiles: market by region, 2024–2037 (US$ billion).
• Figure 29. Fire-retardant composites, panels, foams & encapsulants: market by region, 2024–2037 (US$ billion).
• Figure 30. Firestop systems (sealants, wraps, collars, sprays, boards): market by region, 2024–2037 (US$ billion).
• Figure 31. Typical additive loadings required for target fire classification.
• Figure 32. Advanced halogen-free FR additives & synergists: market by region, 2024–2037 (US$ billion).
• Figure 33. Thermal-runaway propagation pathway and fire-protection material placement in a battery pack.
• Figure 34. EV and BESS fire-protection material intensity, 2025–2037 (kg/kWh).
• Figure 35. Density vs. thermal conductivity map of battery fire-protection materials.
• Figure 36. Global EV and BESS lithium-ion battery demand, 2024–2037 (GWh).
• Figure 37. EV battery fire-protection material demand by material, 2024–2037 (kilotonnes).
• Figure 38. EV battery fire-protection market by material, 2024–2037 (US$ billion).
• Figure 39. Market value by end-use application, 2026 and incremental value to 2037 (US$ million).
• Figure 40. Building & construction: market by product segment, 2024–2037 (US$ billion).
• Figure 41. Oil, gas, petrochemical & LNG: market by product segment, 2024–2037 (US$ billion).
• Figure 42. Electric vehicles & e-mobility: market by product segment, 2024–2037 (US$ billion).
• Figure 43. Stationary energy storage (BESS): market by product segment, 2024–2037 (US$ billion).
• Figure 44. Aerospace, rail, marine & conventional automotive: market by product segment, 2024–2037 (US$ billion).
• Figure 45. Electrical, electronics, cables & data centres: market by product segment, 2024–2037 (US$ billion).
• Figure 46. Protective clothing, PPE & defence: market by product segment, 2024–2037 (US$ billion).
• Figure 47. Industrial, power generation & other: market by product segment, 2024–2037 (US$ billion).
• Figure 48. Global market for advanced fire-retardant and fire-resistant coatings and materials, 2024–2037 (US$ billion).
• Figure 49. Segment attractiveness: 2026 market size vs. 2027–2037 CAGR (bubble size = 2037 market).
• Figure 50. Average selling price index for selected segments, 2024–2037 (2026 = 100).
• Figure 51. Global market by end-use application, 2024–2037 (US$ billion).
• Figure 52. Market scenarios, 2026–2037 (US$ billion).
• Figure 53. North America: market by end-use application, 2024–2037 (US$ billion).
• Figure 54. Europe: market by end-use application, 2024–2037 (US$ billion).
• Figure 55. Asia-Pacific market by country, 2024–2037 (US$ billion).
• Figure 56. Asia-Pacific: market by end-use application, 2024–2037 (US$ billion).
• Figure 57. Middle East & Africa: market by end-use application, 2024–2037 (US$ billion).
• Figure 58. Latin America: market by end-use application, 2024–2037 (US$ billion).
• Figure 59. Competitive positioning map: breadth of fire-protection portfolio vs. exposure to high-growth segments.
• Figure 60. Estimated supplier shares, passive fire protection coatings, 2026.
• Figure 61. Estimated supplier shares, EV battery fire-protection materials, 2026.
• Figure 62. Technology roadmap 2027–2037.
• Figure 63. Risk matrix: probability vs. impact.