EMC Shielding And Test Equipment - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2026 - 2031)

According to Mordor Intelligence, the eMC shielding and test equipment market was valued at USD 8.59 billion in 2025 and is estimated to grow from USD 9.12 billion in 2026 to reach USD 12.34 billion by 2031, growing at a CAGR of 6.22% from 2026 to 2031.

This report is Segmented by Product Type (Shielding Materials, and EMC Test Equipment), Shielding Material Type (Conductive Coatings and Paints, Conductive Gaskets and O-Rings, and More), Test Equipment Type (EMI Receivers and Spectrum Analyzers, and More), End-User Industry (Consumer Electronics, Automotive, and More), and Geography. The Market Forecasts are Provided in Terms of Value (USD).

Global EMC Shielding And Test Equipment Market Trends and Insights

EV And ADAS Electrification Raising EMC Content Per Platform

Electric drivetrains are pushing the EMC shielding and test equipment market toward more complex shielding architectures because traction inverters above 10 kHz and up to 800 V create conducted and radiated interference across battery cables, chassis grounds, and ADAS harnesses. TE Connectivity identified 3 separate shielding layers for EV platforms: enclosure, module, and PCB level, and each layer has its own attenuation target and validation requirements. A 2025 study in Energies found that standard LISNs do not fully capture differential-mode conducted EMI in traction drives, which means more custom measurement setups and longer test cycles for EV programs. Material design is also shifting, as Neklar introduced dual-function shielding for EV battery enclosures that combines EMC containment with flame resistance in one structure. UNECE Regulation No. 10, Revision 7, also extended the upper radiated emissions frequency for electronic sub-assemblies from 2,000 MHz to 6,000 MHz in June 2025, raising the antenna and receiver requirements for every automotive laboratory seeking UNECE accreditation.

5G And High-Frequency Wireless Expansion

The EMC shielding and test equipment market is also benefiting from the 5G rollout, as operators and device makers need new over-the-air test systems and shielding materials that remain effective across the 24 GHz to 44 GHz range. ETSI EN 301 489-50 V2.4.1 formalized updated EMC conditions for cellular base stations, repeaters, and related equipment in September 2025, which supports fresh demand for revised OTA test configurations. Research in the Journal of Computational Electronics demonstrated a conformal frequency-selective surface design with stable suppression from 0° to 80° incidence at the 26 GHz 5G n258 band, underscoring the need for precise material performance at the production scale. The same shift favors precision fabrication, because mmWave performance depends heavily on geometry, fit, and consistency rather than only on bulk conductivity or filler loading. National adoption of ETSI EN 301 489-50 V2.4.1 across European Union member states is due by June 2026, and conflicting standards are scheduled for withdrawal by June 2027, which keeps the compliance transition active across the EMC shielding and test equipment market.

High Capital Intensity Of Chambers And RF Instrumentation

The EMC shielding and test equipment market still faces a significant adoption barrier because full-compliance chambers and RF instrumentation require substantial upfront spending. New fully anechoic chambers cost USD 500,000 to USD 2 million; refurbished systems cost USD 80,000 to USD 400,000; absorber replacement runs USD 40,000 to USD 200,000; and annual calibration adds USD 3,000 to USD 15,000. UNECE R10 Revision 7 adds reverberation chamber requirements for some automotive tests, so labs seeking full compliance may need more than one chamber type instead of a single anechoic setup. That cost burden pushes many small and mid-sized manufacturers toward third-party labs, which concentrate test capacity and create scheduling pressure during launch periods across the EMC shielding and test equipment market. ATEC and NTD Shielding responded with a shared-chamber rental pool in June 2025, demonstrating that equipment-as-a-service models are becoming a practical answer when outright ownership is difficult.

Other drivers and restraints analyzed in the detailed report include:

1. Stricter EMC Regulations And Certification Mandates
2. AI Server And 800G Infrastructure EMI Hot Spots
3. EMC Engineering Talent Shortage And Test Complexity

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Shielding materials accounted for 62.41% of the EMC shielding and test equipment market in 2025, reflecting their use across nearly every electronics manufacturing category, from consumer devices to aircraft avionics. This side of the EMC shielding and test equipment market covers conductive coatings, gaskets, laminates, tapes, foils, and metal enclosures, and many products use more than one of these layers in the same assembly. That broad distribution across enclosures, modules, and PCB structures explains why materials revenue outpaced test equipment revenue in 2025. At the same time, EMC test equipment with 6.35% CAGR is the faster-growing product type through 2031 because revised standards keep changing what qualified laboratories and OEM design teams need to measure.

The line between the 2 product groups is narrowing across the EMC shielding and test equipment industry, because pre-compliance benches are increasingly sold with reference shielding assemblies and application guidance for design teams. Automotive suppliers are also buying pre-compliance benches that mirror the transient immunity profiles required under UNECE R10 Revision 7, thereby reducing dependence on external labs during early design work. Nolato reported FY2025 Engineered Solutions revenue of SEK 4,101 million (USD 424 million), which was approximately USD 387 million, and its materials sub-segment posted adjusted growth of nearly 10% in Q4 2025, led by data center and telecom demand. That mix shift suggests the EMC shielding and test equipment industry is rewarding suppliers that can serve newer compute and communications programs, even as in-process conductive coatings make switching easier in parts of the materials tier.

Laminates, tapes, and foils are the fastest-growing subsegment of shielding materials, with the EMC shielding and test equipment market for this category forecast to expand at a 6.42% CAGR from 2026 to 2031. Their advantage lies in flexibility, as curved EV battery housings, ribbon cables in ADAS modules, and foldable display assemblies often cannot use rigid shielding structures without incurring space or weight penalties. Metal enclosures and cabinets remain important where bulk shielding matters more than mass, especially in industrial power electronics, servers, and rack systems.

Conductive coatings accounted for 31.63% share of the EMC shielding and test equipment market due to their ability to combine effective shielding performance with lightweight characteristics, production flexibility, and cost efficiency. The growing use of smartphones, tablets, laptops, wearable devices, IoT products, and 5G technologies has significantly increased the demand for EMI shielding solutions that protect electronic components from signal interference. These coatings and paints are extensively adopted because they can be easily applied to compact device enclosures and printed circuit boards. Unlike conventional metal shielding, conductive coatings provide reliable electromagnetic protection without adding substantial weight or bulk, making them highly suitable for compact, portable electronic devices.

Geography Analysis

Asia-Pacific held a 47.84% share in 2025, and the regional EMC shielding and test equipment market is forecast to grow at a 6.51% CAGR through 2031. China remains the center of that lead because EV production, 5G deployment, and domestic semiconductor investment all carry mandatory EMC compliance spending at scale. GB/T 18655-2025 extended vehicle EMC test coverage to 5,925 MHz and added EV-specific setups and V2X protection requirements in February 2025. GB/T 46894-2025, published in December 2025, introduced IC-level vehicle EMC testing and included Huawei and Chery Automobile among the drafters, which points to a more independent automotive EMC standards path in China. Japan and South Korea add strong demand from displays, power semiconductors, and consumer appliances, while India is emerging as a manufacturing base, with Nolato opening an EMC-capable facility in Bangalore to support local electronics production.

North America is the second-largest regional market for EMC shielding and test equipment, supported by mature commercial test capacity and high-value demand from the aerospace and defense sector. FCC actions across 2025 and 2026, including revoked lab recognitions, the proposed phase-out of non-reciprocal country testing, and the Trusted Test Lab process effective June 15, 2026, are reshaping where certification revenue goes within the United States. The United States and Canada also anchor much of the AI data center build-out, which is adding a fresh demand stream for shielded enclosures, gaskets, and high-frequency validation tools tied to 800G hardware. Mexico is benefiting from nearshored automotive assembly, especially in EV battery pack manufacturing corridors, which is raising local demand for pre-compliance capability and shielding integration.

Europe remains a policy-led market for EMC shielding and test equipment, as EN 61000-6-4:2026, ETSI EN 301 489-50 V2.4.1, and UNECE R10 Revision 7 are all in active adoption or implementation. Germany remains the instrumentation hub through Rohde and Schwarz, while France-based Emitech strengthened its automotive EMC service position by acquiring ExoTest 3E assets effective January 2026. South America is smaller but growing steadily, driven by ANATEL-related compliance demand and local automotive assembly, while the Middle East is building future demand through 5G densification and data center investment led by the United Arab Emirates and Saudi Arabia. Africa still relies mainly on European-accredited laboratories for certification, which limits local testing infrastructure but leaves room to shield material demand in telecom and industrial equipment imports.

1. Rohde & Schwarz GmbH & Co. KG
2. Keysight Technologies, Inc.
3. ETS-Lindgren Inc.
4. 3M Company
5. Parker-Hannifin Corporation
6. DuPont de Nemours, Inc. (Laird Performance Materials)
7. Henkel AG & Co. KGaA
8. PPG Industries, Inc.
9. TE Connectivity Ltd.
10. Amphenol Corporation
11. Nolato AB
12. Methode Electronics, Inc.
13. Leader Tech Inc.
14. Boyd Corporation
15. Teseq AG
16. Intertek Group plc
17. SGS SA
18. Bureau Veritas SA
19. Yokogawa Electric Corporation
20. Anritsu Corporation
21. Kitagawa Industries Co., Ltd.
22. EM Test (GmbH)
23. LISUN Group
24. TDK Corporation

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support