PUBLISHER: Stratistics Market Research Consulting | PRODUCT CODE: 1094376
PUBLISHER: Stratistics Market Research Consulting | PRODUCT CODE: 1094376
Micro Injection Molded Plastic Market Forecasts to 2028 - Global Analysis By Material (Liquid-Crystal Polymer (LCP), Polybutylene Terephthalate (PBT), Polycarbonate (PC)), Application (Medical &Healthcare, Automotive, Telecom & Optics) & By Geography
According to Stratistics MRC, the Global Micro Injection Molded Plastic Market is accounted for $1,031.11 million in 2021 and is expected to reach $2,456.02 million by 2028 growing at a CAGR of 13.2% during the forecast period. Micro injection molding is a molding method for the manufacture of plastic components for shot weights of 1 to 0.1 grams with tolerances in the range of 10 to 100 microns. This molding process certificates the manufacture of complicated small geometries with maximum possible accuracy and precision.
Market Dynamics:
Driver:
Growing usage in medical application
Micro injection molded plastic components can be found in products such as small surgical instruments, dental implants, catheter tips, microneedles, and infection control devices. The rise in the number of surgical procedures across the globe is a key factor for the rising demand for its application. The high occurrence of chronic diseases, particularly among the geriatric population, is predictable to considerably boost the number of surgical treatment procedures conducted. The number of cosmetic, dental, and aesthetic procedures has increased owing to the rising geriatric population, increasing disposable income, accessibility of advanced technologies, and rising procedural safety. The popularity of these procedures across the globe fuels the market.
Restraint:
High cost
The foremost limitation to market development is owing to the high technology of all-electric machines, the investment costs and maintenance costs are high. The hydraulic motor is connected to an electric power unit, and it works at maximum power in every phase of the molding process, which entails high costs of electric energy. The cost of preventive maintenance significantly affects the cost of production.
Opportunity:
Rising usage of electric vehicles
Electric vehicles are made up of numerous electronic parts such as all-electric auxiliary, electric traction motor, traction battery pack, electric transmission, power electronics controller, and DC converter, among others. These electronics parts are composed of numerous micro components. These micro components are needed for the manufacture of electric vehicles. These are very small and complex components that are manufactured using a micro injection molding machine. As electric vehicle requires more micro injection molded products than ICE vehicle, the increasing demand for electric vehicles is expected to positively impact the growth of the market. This will also allow electric vehicle companies to lower their prices and compete more effectively in the market. The increasing production of electric vehicles will be a good opportunity for the players in the market.
Threat:
Lack of skilled personnel
Due to its complex operating system production of its products need skilled labours. The micro parts used in the medical industry need special attention and critical procedure as the application of these products is very complex. Knowledge in plastics engineering, micro mold design, gate location and sizing, and runner and sprue geometry is essential while operating micro injection molding machines. Process-specific and material-specific knowledge are also crucial. The lack of skilled labour, especially in emerging economies, is one of the major threats for the market players.
Polycarbonate (PC) segment is expected to be the largest during the forecast period
The Polycarbonate (PC) accounted for the largest market share in segment. The market growth is predictable to be motivated by the growing usage of modern medical devices, micro components for the electric vehicles and several components for electronics industry. They are easily worked, molded, and thermoformed.
The medical & healthcare segment is expected to have the highest CAGR during the forecast period
Medical & healthcare held the highest share in the market, due to micro molding services are growing in importance, as medical devices and components continue to shrink, they count on microinjection molded constituents to deliver crucial patient care. Micro molds are used in several medical types of equipment such as catheters, surgical devices, diabetes management devices, hearing aids, etc. Therefore, market players are accepting several strategies to provide solutions for the medical application of micro injection molding plastic.
Region with highest share:
The Asia Pacific is projected to hold the highest market share, owing to the rising use of injection-molded plastic in the automotive, medical, and construction industries. The growing economic growth in the Asia-Pacific province and consumer preference for efficient and smart buildings has enforced manufacturers to develop high-performance products for the construction industry. China, India, and Japan are the key countries contributing to the growth of the market owing to increasing manufacturing facilities along with the increased population.
Region with highest CAGR:
North America dominated the market in the forecast period. The provincial growth is accredited to the technological advancement in the medical industry, growing demand in the automotive sector, and the existence of major market players such as Accumold LLC, Precimold Inc., and Paragon Medical in the market.
Key players in the market:
Some of the key players profiled in the Micro Injection Molded Plastic Market include Yomura Technologies Inc., Veejay Plastics Injection Molding Company, Diversified Plastics, Inc., Spectrum Plastics Group, Inc., Sovrin Plastics, Smc Ltd., Precimold Kamek Precision Injection Molding, Polymermedics Ltd., Paragon Medical, Mtd Micro Molding, Avient Corporation, Microsystems Precision Medical Moulds, Microdyne Plastics, Inc., Micro Molding Inc., Matrix Plastic Products, Manner Solutions for Plastics, Makuta Micro Molding, Knightsbridge Plastics Inc., Isometric Micro Molding, Inc., D&M Plastics, LLC, Barnet Intelligent Materials, American Precision Product, Accumold LLC.
Key developments:
In August 2020: Avient Corporation launched injection moldable thermoplastic elastomers to is versaflex series. The product was formulated without animal derivatives and is able to serve a variety of medical devices applications.
In June 2020: Pacific plastic injection molding, a part of Diversified Plastics Inc. announced that it added 5,000 square feet of office and production space to its existing facility in California. This expansion was done to improve the production and safe operation.
In October 2020: Matrix Plastics Ltd, has announced the establishment of new sub-brand Matrix Medical Plastics. Operating from a purpose-built facility adjacent to the Matrix Plastics main site, Matrix Medical Plastics will provide fully compliant medical compounding services to manufacturers worldwide.
Materials Covered:
- Liquid-Crystal Polymer (LCP)
- Polybutylene Terephthalate (PBT)
- Polycarbonate (PC)
- Polyether Ether Ketone (PEEK)
- Polyetherimide (PEI)
- Polyethylene (PE)
- Polymethyl Methacrylate (PMMA)
- Polyoxymethylene (POM)
Applications Covered:
- Medical & Healthcare
- Automotive
- Telecom & Optics
- Electronics
- Aerospace & Defence
- Packaging
- Construction
Regions Covered:
- North America
- US
- Canada
- Mexico
- Europe
- Germany
- UK
- Italy
- France
- Spain
- Rest of Europe
- Asia Pacific
- Japan
- China
- India
- Australia
- New Zealand
- South Korea
- Rest of Asia Pacific
- South America
- Argentina
- Brazil
- Chile
- Rest of South America
- Middle East & Africa
- Saudi Arabia
- UAE
- Qatar
- South Africa
- Rest of Middle East & Africa
What our report offers:
- Market share assessments for the regional and country-level segments
- Strategic recommendations for the new entrants
- Covers Market data for the years 2020, 2021, 2022, 2025 and 2028
- Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations)
- Strategic recommendations in key business segments based on the market estimations
- Competitive landscaping mapping the key common trends
- Company profiling with detailed strategies, financials, and recent developments
- Supply chain trends mapping the latest technological advancements
Free Customization Offerings:
All the customers of this report will be entitled to receive one of the following free customization options:
- Company Profiling
- Comprehensive profiling of additional market players (up to 3)
- SWOT Analysis of key players (up to 3)
- Regional Segmentation
- Market estimations, Forecasts and CAGR of any prominent country as per the client's interest (Note: Depends on feasibility check)
- Competitive Benchmarking
- Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances
Table of Contents
1 Executive Summary
2 Preface
- 2.1 Abstract
- 2.2 Stake Holders
- 2.3 Research Scope
- 2.4 Research Methodology
- 2.4.1 Data Mining
- 2.4.2 Data Analysis
- 2.4.3 Data Validation
- 2.4.4 Research Approach
- 2.5 Research Sources
- 2.5.1 Primary Research Sources
- 2.5.2 Secondary Research Sources
- 2.5.3 Assumptions
3 Market Trend Analysis
- 3.1 Introduction
- 3.2 Drivers
- 3.3 Restraints
- 3.4 Opportunities
- 3.5 Threats
- 3.6 Application Analysis
- 3.7 Emerging Markets
- 3.8 Impact of Covid-19
4 Porters Five Force Analysis
- 4.1 Bargaining power of suppliers
- 4.2 Bargaining power of buyers
- 4.3 Threat of substitutes
- 4.4 Threat of new entrants
- 4.5 Competitive rivalry
5 Global Micro Injection Molded Plastic Market, By Material
- 5.1 Introduction
- 5.2 Liquid-Crystal Polymer (LCP)
- 5.3 Polybutylene Terephthalate (PBT)
- 5.4 Polycarbonate (PC)
- 5.5 Polyether Ether Ketone (PEEK)
- 5.6 Polyetherimide (PEI)
- 5.7 Polyethylene (PE)
- 5.8 Polymethyl Methacrylate (PMMA)
- 5.9 Polyoxymethylene (POM)
6 Global Micro Injection Molded Plastic Market, By Application
- 6.1 Introduction
- 6.2 Medical & Healthcare
- 6.3 Automotive
- 6.4 Telecom & Optics
- 6.5 Electronics
- 6.6 Aerospace & Defense
- 6.7 Packaging
- 6.8 Construction
7 Global Micro Injection Molded Plastic Market, By Geography
- 7.1 Introduction
- 7.2 North America
- 7.2.1 US
- 7.2.2 Canada
- 7.2.3 Mexico
- 7.3 Europe
- 7.3.1 Germany
- 7.3.2 UK
- 7.3.3 Italy
- 7.3.4 France
- 7.3.5 Spain
- 7.3.6 Rest of Europe
- 7.4 Asia Pacific
- 7.4.1 Japan
- 7.4.2 China
- 7.4.3 India
- 7.4.4 Australia
- 7.4.5 New Zealand
- 7.4.6 South Korea
- 7.4.7 Rest of Asia Pacific
- 7.5 South America
- 7.5.1 Argentina
- 7.5.2 Brazil
- 7.5.3 Chile
- 7.5.4 Rest of South America
- 7.6 Middle East & Africa
- 7.6.1 Saudi Arabia
- 7.6.2 UAE
- 7.6.3 Qatar
- 7.6.4 South Africa
- 7.6.5 Rest of Middle East & Africa
8 Key Developments
- 8.1 Agreements, Partnerships, Collaborations and Joint Ventures
- 8.2 Acquisitions & Mergers
- 8.3 New Product Launch
- 8.4 Expansions
- 8.5 Other Key Strategies
9 Company Profiling
- 9.1 Yomura Technologies Inc.
- 9.2 Veejay Plastics Injection Molding Company
- 9.3 Diversified Plastics, Inc.
- 9.4 Spectrum Plastics Group, Inc.
- 9.5 Sovrin Plastics
- 9.6 Smc Ltd.
- 9.7 Precimold Kamek Precision Injection Molding
- 9.8 Polymermedics Ltd.
- 9.9 Paragon Medical
- 9.10 Mtd Micro Molding
- 9.11 Avient Corporation
- 9.12 Microsystems Precision Medical Moulds
- 9.13 Microdyne Plastics, Inc.
- 9.14 Micro Molding Inc.
- 9.15 Matrix Plastic Products
- 9.16 Manner Solutions for Plastics
- 9.17 Makuta Micro Molding
- 9.18 Knightsbridge Plastics Inc.
- 9.19 Isometric Micro Molding, Inc.
- 9.20 D&M Plastics, LLC
- 9.21 Barnet Intelligent Materials
- 9.22 American Precision Product
- 9.23 Accumold LLC
List of Tables
- Table 1 Global Micro Injection Molded Plastic Market Outlook, By Region (2020-2028) (US $MN)
- Table 2 Global Micro Injection Molded Plastic Market Outlook, By Material (2020-2028) (US $MN)
- Table 3 Global Micro Injection Molded Plastic Market Outlook, By Liquid-Crystal Polymer (LCP) (2020-2028) (US $MN)
- Table 4 Global Micro Injection Molded Plastic Market Outlook, By Polybutylene Terephthalate (PBT) (2020-2028) (US $MN)
- Table 5 Global Micro Injection Molded Plastic Market Outlook, By Polycarbonate (PC) (2020-2028) (US $MN)
- Table 6 Global Micro Injection Molded Plastic Market Outlook, By Polyether Ether Ketone (PEEK) (2020-2028) (US $MN)
- Table 7 Global Micro Injection Molded Plastic Market Outlook, By Polyetherimide (PEI) (2020-2028) (US $MN)
- Table 8 Global Micro Injection Molded Plastic Market Outlook, By Polyethylene (PE) (2020-2028) (US $MN)
- Table 9 Global Micro Injection Molded Plastic Market Outlook, By Polymethyl Methacrylate (PMMA) (2020-2028) (US $MN)
- Table 10 Global Micro Injection Molded Plastic Market Outlook, By Polyoxymethylene (POM) (2020-2028) (US $MN)
- Table 11 Global Micro Injection Molded Plastic Market Outlook, By Application (2020-2028) (US $MN)
- Table 12 Global Micro Injection Molded Plastic Market Outlook, By Medical & Healthcare (2020-2028) (US $MN)
- Table 13 Global Micro Injection Molded Plastic Market Outlook, By Automotive (2020-2028) (US $MN)
- Table 14 Global Micro Injection Molded Plastic Market Outlook, By Telecom & Optics (2020-2028) (US $MN)
- Table 15 Global Micro Injection Molded Plastic Market Outlook, By Electronics (2020-2028) (US $MN)
- Table 16 Global Micro Injection Molded Plastic Market Outlook, By Aerospace & Defense (2020-2028) (US $MN)
- Table 17 Global Micro Injection Molded Plastic Market Outlook, By Packaging (2020-2028) (US $MN)
- Table 18 Global Micro Injection Molded Plastic Market Outlook, By Construction (2020-2028) (US $MN)
- Table 19 North America Micro Injection Molded Plastic Market Outlook, By Country (2020-2028) (US $MN)
- Table 20 North America Micro Injection Molded Plastic Market Outlook, By Material (2020-2028) (US $MN)
- Table 21 North America Micro Injection Molded Plastic Market Outlook, By Liquid-Crystal Polymer (LCP) (2020-2028) (US $MN)
- Table 22 North America Micro Injection Molded Plastic Market Outlook, By Polybutylene Terephthalate (PBT) (2020-2028) (US $MN)
- Table 23 North America Micro Injection Molded Plastic Market Outlook, By Polycarbonate (PC) (2020-2028) (US $MN)
- Table 24 North America Micro Injection Molded Plastic Market Outlook, By Polyether Ether Ketone (PEEK) (2020-2028) (US $MN)
- Table 25 North America Micro Injection Molded Plastic Market Outlook, By Polyetherimide (PEI) (2020-2028) (US $MN)
- Table 26 North America Micro Injection Molded Plastic Market Outlook, By Polyethylene (PE) (2020-2028) (US $MN)
- Table 27 North America Micro Injection Molded Plastic Market Outlook, By Polymethyl Methacrylate (PMMA) (2020-2028) (US $MN)
- Table 28 North America Micro Injection Molded Plastic Market Outlook, By Polyoxymethylene (POM) (2020-2028) (US $MN)
- Table 29 North America Micro Injection Molded Plastic Market Outlook, By Application (2020-2028) (US $MN)
- Table 30 North America Micro Injection Molded Plastic Market Outlook, By Medical & Healthcare (2020-2028) (US $MN)
- Table 31 North America Micro Injection Molded Plastic Market Outlook, By Automotive (2020-2028) (US $MN)
- Table 32 North America Micro Injection Molded Plastic Market Outlook, By Telecom & Optics (2020-2028) (US $MN)
- Table 33 North America Micro Injection Molded Plastic Market Outlook, By Electronics (2020-2028) (US $MN)
- Table 34 North America Micro Injection Molded Plastic Market Outlook, By Aerospace & Defense (2020-2028) (US $MN)
- Table 35 North America Micro Injection Molded Plastic Market Outlook, By Packaging (2020-2028) (US $MN)
- Table 36 North America Micro Injection Molded Plastic Market Outlook, By Construction (2020-2028) (US $MN)
- Table 37 Europe Micro Injection Molded Plastic Market Outlook, By Country (2020-2028) (US $MN)
- Table 38 Europe Micro Injection Molded Plastic Market Outlook, By Material (2020-2028) (US $MN)
- Table 39 Europe Micro Injection Molded Plastic Market Outlook, By Liquid-Crystal Polymer (LCP) (2020-2028) (US $MN)
- Table 40 Europe Micro Injection Molded Plastic Market Outlook, By Polybutylene Terephthalate (PBT) (2020-2028) (US $MN)
- Table 41 Europe Micro Injection Molded Plastic Market Outlook, By Polycarbonate (PC) (2020-2028) (US $MN)
- Table 42 Europe Micro Injection Molded Plastic Market Outlook, By Polyether Ether Ketone (PEEK) (2020-2028) (US $MN)
- Table 43 Europe Micro Injection Molded Plastic Market Outlook, By Polyetherimide (PEI) (2020-2028) (US $MN)
- Table 44 Europe Micro Injection Molded Plastic Market Outlook, By Polyethylene (PE) (2020-2028) (US $MN)
- Table 45 Europe Micro Injection Molded Plastic Market Outlook, By Polymethyl Methacrylate (PMMA) (2020-2028) (US $MN)
- Table 46 Europe Micro Injection Molded Plastic Market Outlook, By Polyoxymethylene (POM) (2020-2028) (US $MN)
- Table 47 Europe Micro Injection Molded Plastic Market Outlook, By Application (2020-2028) (US $MN)
- Table 48 Europe Micro Injection Molded Plastic Market Outlook, By Medical & Healthcare (2020-2028) (US $MN)
- Table 49 Europe Micro Injection Molded Plastic Market Outlook, By Automotive (2020-2028) (US $MN)
- Table 50 Europe Micro Injection Molded Plastic Market Outlook, By Telecom & Optics (2020-2028) (US $MN)
- Table 51 Europe Micro Injection Molded Plastic Market Outlook, By Electronics (2020-2028) (US $MN)
- Table 52 Europe Micro Injection Molded Plastic Market Outlook, By Aerospace & Defense (2020-2028) (US $MN)
- Table 53 Europe Micro Injection Molded Plastic Market Outlook, By Packaging (2020-2028) (US $MN)
- Table 54 Europe Micro Injection Molded Plastic Market Outlook, By Construction (2020-2028) (US $MN)
- Table 55 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Country (2020-2028) (US $MN)
- Table 56 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Material (2020-2028) (US $MN)
- Table 57 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Liquid-Crystal Polymer (LCP) (2020-2028) (US $MN)
- Table 58 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Polybutylene Terephthalate (PBT) (2020-2028) (US $MN)
- Table 59 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Polycarbonate (PC) (2020-2028) (US $MN)
- Table 60 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Polyether Ether Ketone (PEEK) (2020-2028) (US $MN)
- Table 61 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Polyetherimide (PEI) (2020-2028) (US $MN)
- Table 62 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Polyethylene (PE) (2020-2028) (US $MN)
- Table 63 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Polymethyl Methacrylate (PMMA) (2020-2028) (US $MN)
- Table 64 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Polyoxymethylene (POM) (2020-2028) (US $MN)
- Table 65 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Application (2020-2028) (US $MN)
- Table 66 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Medical & Healthcare (2020-2028) (US $MN)
- Table 67 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Automotive (2020-2028) (US $MN)
- Table 68 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Telecom & Optics (2020-2028) (US $MN)
- Table 69 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Electronics (2020-2028) (US $MN)
- Table 70 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Aerospace & Defense (2020-2028) (US $MN)
- Table 71 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Packaging (2020-2028) (US $MN)
- Table 72 Asia Pacific Micro Injection Molded Plastic Market Outlook, By Construction (2020-2028) (US $MN)
- Table 73 South America Micro Injection Molded Plastic Market Outlook, By Country (2020-2028) (US $MN)
- Table 74 South America Micro Injection Molded Plastic Market Outlook, By Material (2020-2028) (US $MN)
- Table 75 South America Micro Injection Molded Plastic Market Outlook, By Liquid-Crystal Polymer (LCP) (2020-2028) (US $MN)
- Table 76 South America Micro Injection Molded Plastic Market Outlook, By Polybutylene Terephthalate (PBT) (2020-2028) (US $MN)
- Table 77 South America Micro Injection Molded Plastic Market Outlook, By Polycarbonate (PC) (2020-2028) (US $MN)
- Table 78 South America Micro Injection Molded Plastic Market Outlook, By Polyether Ether Ketone (PEEK) (2020-2028) (US $MN)
- Table 79 South America Micro Injection Molded Plastic Market Outlook, By Polyetherimide (PEI) (2020-2028) (US $MN)
- Table 80 South America Micro Injection Molded Plastic Market Outlook, By Polyethylene (PE) (2020-2028) (US $MN)
- Table 81 South America Micro Injection Molded Plastic Market Outlook, By Polymethyl Methacrylate (PMMA) (2020-2028) (US $MN)
- Table 82 South America Micro Injection Molded Plastic Market Outlook, By Polyoxymethylene (POM) (2020-2028) (US $MN)
- Table 83 South America Micro Injection Molded Plastic Market Outlook, By Application (2020-2028) (US $MN)
- Table 84 South America Micro Injection Molded Plastic Market Outlook, By Medical & Healthcare (2020-2028) (US $MN)
- Table 85 South America Micro Injection Molded Plastic Market Outlook, By Automotive (2020-2028) (US $MN)
- Table 86 South America Micro Injection Molded Plastic Market Outlook, By Telecom & Optics (2020-2028) (US $MN)
- Table 87 South America Micro Injection Molded Plastic Market Outlook, By Electronics (2020-2028) (US $MN)
- Table 88 South America Micro Injection Molded Plastic Market Outlook, By Aerospace & Defense (2020-2028) (US $MN)
- Table 89 South America Micro Injection Molded Plastic Market Outlook, By Packaging (2020-2028) (US $MN)
- Table 90 South America Micro Injection Molded Plastic Market Outlook, By Construction (2020-2028) (US $MN)
- Table 91 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Country (2020-2028) (US $MN)
- Table 92 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Material (2020-2028) (US $MN)
- Table 93 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Liquid-Crystal Polymer (LCP) (2020-2028) (US $MN)
- Table 94 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Polybutylene Terephthalate (PBT) (2020-2028) (US $MN)
- Table 95 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Polycarbonate (PC) (2020-2028) (US $MN)
- Table 96 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Polyether Ether Ketone (PEEK) (2020-2028) (US $MN)
- Table 97 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Polyetherimide (PEI) (2020-2028) (US $MN)
- Table 98 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Polyethylene (PE) (2020-2028) (US $MN)
- Table 99 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Polymethyl Methacrylate (PMMA) (2020-2028) (US $MN)
- Table 100 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Polyoxymethylene (POM) (2020-2028) (US $MN)
- Table 101 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Application (2020-2028) (US $MN)
- Table 102 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Medical & Healthcare (2020-2028) (US $MN)
- Table 103 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Automotive (2020-2028) (US $MN)
- Table 104 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Telecom & Optics (2020-2028) (US $MN)
- Table 105 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Electronics (2020-2028) (US $MN)
- Table 106 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Aerospace & Defense (2020-2028) (US $MN)
- Table 107 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Packaging (2020-2028) (US $MN)
- Table 108 Middle East & Africa Micro Injection Molded Plastic Market Outlook, By Construction (2020-2028) (US $MN)
