Battery Plate Market Forecasts to 2030 - Global Analysis By Type, Plate Design, Technology, Application, End User and By Geography

According to Stratistics MRC, the Global Battery Plate Market is accounted for $2.88 billion in 2023 and is expected to reach $9.51 billion by 2030 growing at a CAGR of 18.6% during the forecast period. Battery plates are essential components in lead-acid batteries, critical for energy storage. Typically made of lead-based alloys, battery plates facilitate the chemical reactions that store and release energy during charging and discharging cycles. They come in two types: positive and negative plates, each playing a distinct role in the battery's operation. The design and composition of battery plates influence crucial factors like battery capacity, lifespan, and performance, making them fundamental to battery technology advancement.

According to the IEA, in 2022, the demand for automotive lithium-ion (Li-ion) batteries increased significantly by about 65% to reach 550 GWh, up from 330 GWh in 2021.

Market Dynamics:

Driver:

Growing consumer electronics market

With the escalating demand for smartphones, laptops, wearables, and other electronic devices, there arises a critical need for reliable, long-lasting batteries. Battery plates, crucial components within rechargeable batteries, experience heightened demand to meet the power requirements of these gadgets. As consumers seek devices with longer battery life and enhanced performance, manufacturers must innovate battery plate technologies to ensure efficiency and durability. Consequently, the thriving consumer electronics sector continues to drive the growth trajectory of the battery plate market, fostering innovation and advancement.

Restraint:

Environmental concerns

Environmental concerns in battery plates primarily revolve around the extraction and processing of raw materials like lead, which can lead to soil and water contamination if not properly managed. Additionally, the disposal of used batteries poses risks of heavy metal pollution. Heightened environmental regulations and public awareness of these issues drive demand for eco-friendly alternatives, thereby hampering market growth for traditional battery plates.

Opportunity:

Rising adoption of renewable energy sources

The rising adoption of renewable energy sources, such as solar and wind power, is lashing the demand for energy storage solutions. As renewable energy generation is intermittent, batteries play a crucial role in storing excess energy for use during periods of low generation or high demand. This trend is propelling the need for advanced battery technologies with efficient and durable battery plates to enhance energy storage capacity and longevity. Consequently, the battery plate market is experiencing significant growth as industries and consumers seek sustainable and reliable energy solutions to mitigate environmental impact and ensure grid stability.

Threat:

High initial investments

Battery plate production primarily stem from the need for advanced manufacturing technologies, specialized materials, and rigorous quality control measures. These investments encompass R&D costs, infrastructure setup, and skilled labor training. Additionally, high initial investments lead to elevated product costs, deterring potential consumers and hindering widespread adoption of battery technology. This scenario impedes market growth as affordability remains a significant challenge for both industrial and consumer segments, slowing down market expansion.

Covid-19 Impact

The covid-19 pandemic significantly impacted the battery plate market. Disruptions in supply chains and reduced manufacturing activities led to a decline in market growth. Lockdown measures and restrictions on movement also hindered distribution channels and delayed project timelines. However, the market showed resilience as the demand for batteries persisted, particularly in sectors like healthcare, telecommunications, and remote work technologies. Adaptation to new safety protocols and increased focus on renewable energy sources provided some opportunities for market recovery and growth amidst the challenges posed by the pandemic.

The grid plate segment is expected to be the largest during the forecast period

The grid plate segment is estimated to have a lucrative growth. Grid battery plates, features a grid-like structure typically made of lead or lead alloys. These plates serve as the foundation for the deposition of active materials, enabling the flow of electric current within the battery cell. Grid plates provide structural support, enhancing durability and performance, especially in demanding applications such as automotive, industrial, and stationary power systems. Their design facilitates efficient energy storage and release, making grid battery plates integral to the functioning of lead-acid batteries across various sectors.

The automotive batteries segment is expected to have the highest CAGR during the forecast period

The automotive batteries segment is anticipated to witness the highest CAGR growth during the forecast period. In automotive batteries, battery plates are fundamental components crucial for storing and releasing electrical energy. They play a pivotal role in starting, lighting, and ignition (SLI) systems in vehicles, providing the necessary power to start the engine and support electrical systems. Automotive batteries rely on the design and composition of these plates to ensure reliable performance, especially in harsh operating conditions. Thus, battery plates are indispensable in ensuring the functionality and efficiency of automotive batteries.

Region with largest share:

The battery plate market in the Asia Pacific region is witnessing significant growth driven by increasing demand for energy storage solutions, particularly in emerging economies like China, India, and Southeast Asian countries. Factors such as rapid urbanization, industrialization, and government initiatives promoting renewable energy adoption contribute to market expansion. Additionally, advancements in battery technology, coupled with growing consumer electronics and automotive sectors, further propel market growth. Key players are focusing on research and development activities to enhance product efficiency and meet evolving consumer demands, fostering competition and innovation in the region.

Region with highest CAGR:

Europe is projected to have the highest CAGR over the forecast period, owing to the region's emphasis on renewable energy sources and sustainable practices. Government initiatives aimed at reducing carbon emissions and promoting electric vehicles are driving market expansion. Technological advancements in battery technology, particularly in the automotive and energy storage sectors, further propel growth. Additionally, increasing investments in research and development activities contribute to innovation and product enhancement. Further, strategic partnerships and collaborations among key players are presenting opportunities in the European battery plate market.

Key players in the market

Some of the key players profiled in the Battery Plate Market include Gravita India Limited, Exide Industries Limited, Johnson Controls, Terra Supreme Battery, East Penn Manufacturing Company, GS Yuasa Corporation, C&D Technologies, Leoch International Technology Limited, Hammond Group, Chaowei Power Holdings Limited, Crown Battery, Narada Power Source Limited, HOPPECKE Batterien GmbH, Northstar Battery, FIAMM Energy Technology, Trojan Battery Company and EnerSys.

Key Developments:

In February 2024, Terra Supreme Battery started production of its Group 31 battery based on composite grid bipolar AGM lead acid chemistry at its plant in the United States. The Group 31 batteries are the initial product offering, targeting sectors including trucking, local delivery, marine, railroad, renewable energy storage in both residential and utility scale, data center back-up power and military market segments.

In November 2023, Exide Technologies, a leading supplier of energy storage solutions for stationary applications, has launched its new Sprinter Pure Power battery range. Specifically developed for use in data center UPS, this latest generation of advanced AGM batteries also serves a broad variety of other applications.

Types Covered:

• Lead-acid Battery Plates
• Lithium-ion Battery Plates
• Nickel-Cadmium Battery Plates
• Nickel-Metal Hydride Battery Plates
• Zinc-Air Battery Plates
• Alkaline Battery Plates
• Other Types

Plate Designs Covered:

• Grid Plate
• Pasted Plate
• Tubular Plate
• Flat Plate
• Prismatic Plate
• Other Plate Designs

Technologies Covered:

• Conventional Flooded Batteries
• Valve-Regulated Lead-Acid (VRLA) Batteries
• Advanced Lead-Acid Batteries
• Flow Batteries
• Other Technologies

Applications Covered:

• Automotive Batteries
• Renewable Energy Storage
• Consumer Electronics Batteries
• Medical Devices Batteries
• Aerospace & Defense Batteries
• Other Applications

End Users Covered:

• Original Equipment Manufacturers (OEMs)
• Aftermarket

Regions Covered:

• North America
  • US
  • Canada
  • Mexico
• Europe
  • Germany
  • UK
  • Italy
  • France
  • Spain
  • Rest of Europe
• Asia Pacific
  • Japan
  • China
  • India
  • Australia
  • New Zealand
  • South Korea
  • Rest of Asia Pacific
• South America
  • Argentina
  • Brazil
  • Chile
  • Rest of South America
• Middle East & Africa
  • Saudi Arabia
  • UAE
  • Qatar
  • South Africa
  • Rest of Middle East & Africa

What our report offers:

• Market share assessments for the regional and country-level segments
• Strategic recommendations for the new entrants
• Covers Market data for the years 2021, 2022, 2023, 2026, and 2030
• Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations)
• Strategic recommendations in key business segments based on the market estimations
• Competitive landscaping mapping the key common trends
• Company profiling with detailed strategies, financials, and recent developments
• Supply chain trends mapping the latest technological advancements

Free Customization Offerings:

All the customers of this report will be entitled to receive one of the following free customization options:

• Company Profiling
  • Comprehensive profiling of additional market players (up to 3)
  • SWOT Analysis of key players (up to 3)
• Regional Segmentation
  • Market estimations, Forecasts and CAGR of any prominent country as per the client's interest (Note: Depends on feasibility check)
• Competitive Benchmarking
  • Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances