PUBLISHER: The Business Research Company | PRODUCT CODE: 2183656
PUBLISHER: The Business Research Company | PRODUCT CODE: 2183656
Automotive carbon thermoplastics are thermoplastic composite materials reinforced with carbon fibers to provide increased stiffness, strength, and other application-dependent performance characteristics for automotive components. They are used in structural, semi-structural, and interior applications where their potential for weight reduction and mechanical performance can provide benefits such as improved vehicle efficiency or electric vehicle range.
The primary resin types of automotive carbon thermoplastic include polyamide, polypropylene, polyphenylene sulfide, polyetherimide, polyether ether ketone, polycarbonate, and other resin types. Polyamide refers to a thermoplastic resin containing amide linkages that provides strength, durability, and resistance to heat and chemicals when reinforced with carbon fiber. These materials incorporate short carbon fiber, long carbon fiber, and continuous carbon fiber and are supplied through original equipment manufacturers and aftermarket channels. The various applications involved are exterior components, interior components, structural components, chassis components, and powertrain and under the hood components, and they are utilized by end uses including conventional vehicles, electric mobility, and motorsports and performance vehicles.
Tariffs are influencing the automotive carbon thermoplastics market by increasing the cost of imported carbon fibers, specialty resins, composite materials, and automotive components used in lightweight vehicle applications. Resin manufacturers, material suppliers, and automotive OEMs are likely to experience greater cost pressures, particularly in North America, Europe, and Asia-Pacific, due to interconnected automotive and raw-material supply chains. These higher costs may delay material substitution and increase vehicle production expenses, while tariffs can also encourage regional sourcing, domestic composite manufacturing, and investments in localized carbon fiber and thermoplastic production.
The automotive carbon thermoplastic market research report is one of a series of new reports from The Business Research Company that provides automotive carbon thermoplastic market statistics, including automotive carbon thermoplastic industry global market size, regional shares, competitors with a automotive carbon thermoplastic market share, detailed automotive carbon thermoplastic market segments, market trends and opportunities, and any further data you may need to thrive in the automotive carbon thermoplastic industry. This automotive carbon thermoplastic market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenario of the industry.
The automotive carbon thermoplastic market size has grown rapidly in recent years. It will grow from $1.21 billion in 2025 to $1.41 billion in 2026 at a compound annual growth rate (CAGR) of 16.6%. The growth in the historic period can be attributed to increasing demand for automotive lightweighting, growing adoption of carbon fiber-reinforced components, rising vehicle fuel efficiency requirements, increasing use of thermoplastics in automotive applications, and expansion of high-performance vehicle manufacturing.
The automotive carbon thermoplastic market size is expected to see rapid growth in the next few years. It will grow to $2.57 billion in 2030 at a compound annual growth rate (CAGR) of 16.2%. The growth in the forecast period can be attributed to rising electric vehicle production, increasing demand for extended EV driving range, growing adoption of lightweight structural components, advancements in carbon fiber thermoplastic manufacturing technologies, and increasing demand for high-performance automotive materials. Major trends in the forecast period include increasing adoption of carbon fiber-reinforced thermoplastics, growing use of continuous carbon fiber composites, development of recyclable carbon thermoplastic components, expansion of lightweight structural automotive components, and advancements in high-speed thermoplastic composite processing.
The rapid growth in electric vehicle production is expected to propel the growth of the automotive carbon thermoplastic market in the coming years. Electric vehicles are automobiles powered wholly or partially by electric motors using rechargeable battery systems instead of conventional internal combustion engines, offering lower emissions and improved energy efficiency. The growth in electric vehicle production is driven by stringent emission regulations and government incentives that encourage the transition toward cleaner transportation. The growth in electric vehicle (EV) production increases demand for automotive carbon thermoplastics, as these lightweight, high-strength materials reduce vehicle weight, improve battery efficiency and driving range, and enhance the structural performance of electric vehicles. Automotive carbon thermoplastics support electric vehicle production by reducing vehicle weight, improving structural performance, and extending battery driving range without compromising safety or durability. For instance, in April 2026, according to the International Energy Agency (IEA), a France-based intergovernmental energy organization, global electric car production reached nearly 22 million units in 2025, representing an increase of more than 25% compared with 2024. Therefore, the rapid growth in electric vehicle production is driving the growth of the automotive carbon thermoplastic market.
The increasing investment in recycled carbon-fiber technologies is expected to propel the growth of the automotive carbon thermoplastic market in the coming years. Recycled carbon fiber refers to carbon fiber recovered from manufacturing scrap and end-of-life composite materials and processed for reuse in new applications. The demand for recycled carbon fiber is increasing due to growing environmental concerns, as recycling carbon fiber helps reduce composite waste, conserve raw materials, lower the environmental impact of carbon-fiber production, and support more sustainable manufacturing practices. Increasing investment in recycled carbon-fiber technologies drives demand for automotive carbon thermoplastics by supporting the development of lightweight, high-strength, and recyclable materials that can improve vehicle fuel efficiency, reduce manufacturing waste, and support sustainability goals. For instance, in June 2025, according to the U.S. National Science Foundation (NSF), a US-based government agency, $1.25 million was awarded to Endeavor Composites Inc. and the University of Tennessee to develop technology for sustainably repurposing off-spec and recycled carbon fiber into low-cost nonwoven fabrics, including carbon-fiber/thermoplastic blends such as polypropylene, with a focus on automotive applications. Therefore, the increasing investment in recycled carbon-fiber technologies is driving the growth of the automotive carbon thermoplastic market.
The stringent vehicle emission regulations are expected to propel the growth of the automotive carbon thermoplastic market in the coming years. Stringent vehicle emission regulations refer to strict government standards that limit the amount of harmful pollutants and greenhouse gases that vehicles can emit into the atmosphere. Stringent vehicle emission regulations are increasing due to growing concerns about air pollution, as rising vehicle emissions contribute significantly to greenhouse gas emissions and harmful air pollutants that negatively impact environmental and public health. Stringent vehicle emission regulations are driving demand for automotive carbon thermoplastics by increasing the need for lightweight, high-performance materials that reduce vehicle weight, improve fuel and energy efficiency, support lower carbon emissions, and help automakers comply with increasingly stringent environmental standards. For instance, in May 2026, according to the U.S. Environmental Protection Agency, a US-based government agency, advanced clean car standards are expected to deliver $190 billion in net benefits, reduce over 3 billion tons of greenhouse gas emissions by 2050, and improve public health and fuel savings through stronger vehicle emission regulations. Therefore, the stringent implementation of vehicle emission regulations is driving the growth of the automotive carbon thermoplastic market.
Major companies operating in the automotive carbon thermoplastic market are BASF SE, LG Chem Ltd., Saudi Basic Industries Corporation, Mitsubishi Chemical Group Corporation, Asahi Kasei Corporation, Toray Industries Inc., Evonik Industries AG, Sumitomo Chemical Co. Ltd., LOTTE Chemical Corporation, Celanese Corporation, Arkema S.A., Syensqo SA, Teijin Limited, Envalior B.V., Kolon Industries Inc., Avient Corporation, Ensinger GmbH, Teknor Apex Company, Polyplastics Co. Ltd., RTP Company, SGL Carbon SE, Victrex plc, Radici Novacips S.p.A.
Asia-Pacific was the dominant region in the automotive carbon thermoplastic market in 2025. Asia-Pacific is expected to be the rapidly growing region in the forecast period. The regions covered in the automotive carbon thermoplastic market report are Asia-Pacific, South East Asia, Western Europe, Eastern Europe, North America, South America, Middle East, Africa.
The countries covered in the automotive carbon thermoplastic market report are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Taiwan, Russia, South Korea, UK, USA, Canada, Italy, Spain.
The automotive carbon thermoplastic market consists of sales of carbon fiber-reinforced thermoplastic sheets, carbon fiber-reinforced thermoplastic tapes, carbon fiber-reinforced thermoplastic prepregs, long carbon fiber thermoplastic compounds, short carbon fiber thermoplastic compounds, continuous fiber thermoplastic laminates, thermoplastic composite pellets, and overmolding-ready carbon thermoplastic materials. Values in this market are 'factory gate' values, that is the value of goods sold by the manufacturers or creators of the goods, whether to other entities (including downstream manufacturers, wholesalers, distributors and retailers) or directly to end customers. The value of goods in this market includes related services sold by the creators of the goods.
The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD unless otherwise specified).
The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products.
Automotive Carbon Thermoplastic Market Global Report 2026 from The Business Research Company provides strategists, marketers and senior management with the critical information they need to assess the market.
This report focuses automotive carbon thermoplastic market which is experiencing strong growth. The report gives a guide to the trends which will be shaping the market over the next ten years and beyond.
Where is the largest and fastest growing market for automotive carbon thermoplastic ? How does the market relate to the overall economy, demography and other similar markets? What forces will shape the market going forward, including technological disruption, regulatory shifts, and changing consumer preferences? The automotive carbon thermoplastic market global report from the Business Research Company answers all these questions and many more.
The report covers market characteristics, size and growth, segmentation, regional and country breakdowns, total addressable market (TAM), market attractiveness score (MAS), competitive landscape, market shares, company scoring matrix, trends and strategies for this market. It traces the market's historic and forecast market growth by geography.
Added Benefits available all on all list-price licence purchases, to be claimed at time of purchase. Customisations within report scope and limited to 20% of content and consultant support time limited to 8 hours.