Acrylic Polymers and Acrylic Co-Polymers Market - Global Industry Size, Share, Trends, Opportunity, and Forecast, Segmented By Type, By Application, By Region & Competition, 2020-2030F

Acrylic Polymers and Acrylic Co-Polymers Market was valued at USD 1.53 Billion in 2024 and is expected to reach USD 2.01 Billion by 2030 with a CAGR of 5.04%. The global Acrylic Polymers and Acrylic Co-Polymers Market represents a dynamic and steadily expanding segment of the broader chemical and polymer industry. These synthetic polymers, primarily derived from acrylic acid and its derivatives, are highly valued for their versatility and performance across a wide range of end-use sectors. As industries worldwide prioritize efficiency, sustainability, and product performance, the demand for acrylic-based solutions continues to grow at a robust pace.

A key driver of this market is the construction industry, where acrylic polymers and co-polymers are extensively used in paints, coatings, sealants, and waterproofing systems. Their strong adhesion, excellent weather and UV resistance, and long-lasting durability make them an ideal choice for both residential and commercial infrastructure projects. With the rise of global urbanization and infrastructure modernization, especially in emerging markets across Asia-Pacific and the Middle East-the demand for these materials in construction applications is expected to see sustained growth.

The paints and coatings sector further reinforces market expansion. Acrylic polymers act as key binders and resins in decorative paints, protective coatings, and industrial finishes. With increasing regulatory focus on sustainability and air quality, the industry is shifting toward low-VOC, waterborne formulations-an area where acrylic polymers offer a competitive advantage. As a result, their use has grown significantly in environmentally friendly architectural and automotive coatings. In adhesives and sealants, acrylic polymers provide strong bonding, chemical resistance, and moisture protection. These properties are critical for automotive assembly, construction applications, and packaging solutions. The automotive sector, in particular, benefits from acrylic-based adhesives for component bonding and noise-dampening solutions, as vehicle design evolves toward lighter and more energy-efficient models.

Packaging represents another high-potential area, especially given the rise of e-commerce and consumer demand for sustainable, visually appealing packaging. Acrylic coatings are used to improve printability, abrasion resistance, and overall aesthetic quality of packaging films and papers. Acrylic polymers are gaining traction in textile and fiber applications, including outdoor fabrics and synthetic clothing. Their resistance to fading, weathering, and wear has made them suitable for high-performance textiles. The global Acrylic Polymers and Acrylic Co-Polymers Market is expected to witness strong, sustained growth. Driven by innovation, regulatory compliance, and broad industrial adoption, acrylic materials are well-positioned to meet the evolving performance and sustainability needs of various industries over the coming years.

Key Market Drivers

Construction growth

Construction growth stands as a significant catalyst propelling the expansion of the global Acrylic Polymers and Acrylic Co-Polymers Market. These polymers play a critical role in enhancing the performance and durability of modern construction materials, making them indispensable across multiple construction-related applications. As global construction activities continue to surge especially in emerging economies, the demand for high-performance, versatile polymer-based materials is experiencing strong upward momentum.

Acrylic polymers and co-polymers are widely utilized in architectural paints, exterior coatings, and protective finishes, primarily as binders and resins. Their attribute, such as excellent adhesion, UV and weather resistance, and long-term durability, make them ideal for construction coatings that need to withstand harsh environmental conditions. Global construction output is projected to grow by 42% between 2020 and 2030, reaching USD 15.2 trillion, with key contributions from China, the U.S., and India. This sustained construction boom significantly increases the consumption of acrylic-based coatings, especially in residential, commercial, and infrastructure projects.

In addition to coatings, acrylic polymers are heavily used in sealants and adhesives, critical components in construction for bonding surfaces and sealing joints. Their resistance to water, chemicals, and temperature variations ensures structural reliability and longevity, particularly in projects such as high-rise buildings and industrial facilities. As green building practices gain traction, water-based, low-VOC acrylic adhesives are also increasingly preferred, in line with regulatory requirements and sustainability goals.

Another area of growing application is in cement and concrete modification. Acrylic polymers enhance the elasticity, workability, and crack resistance of concrete, making them especially valuable in large-scale infrastructure developments like bridges, tunnels, and highways. According to the World Cement Association, infrastructure accounts for nearly 60% of global cement demand, indicating the scale of opportunity for polymer additives in this segment. Acrylic co-polymers are extensively used in waterproofing membranes and coatings. These materials are essential for preventing water damage in building foundations, rooftops, and underground structures, particularly vital in flood-prone and high-precipitation regions. The global construction boom, supported by rapid urbanization and infrastructure investments, directly fuels the demand for acrylic polymers and co-polymers. Their multifunctionality and performance benefits ensure they remain at the forefront of innovation in the construction materials landscape.

Key Market Challenges

Environmental regulations

Environmental regulations pose a significant challenge to the global Acrylic Polymers and Acrylic Co-Polymers Market. As governments worldwide intensify their focus on environmental sustainability and safety, the chemical industry, including acrylic polymer manufacturers, faces stricter compliance requirements, which can impact the production, formulation, and marketability of these compounds.

One of the key environmental challenges revolves around the regulation of volatile organic compounds (VOCs). Acrylic polymers and co-polymers, often used in paints, coatings, adhesives, and sealants, can release VOCs into the atmosphere during application and drying. These VOCs contribute to air pollution, smog formation, and adverse health effects. Consequently, governments have implemented stringent VOC limits and emission reduction targets. Complying with VOC regulations necessitates the development of low-VOC or VOC-free formulations. While acrylic polymers offer the versatility to create eco-friendly products, formulating them to meet these standards can be technically challenging. Manufacturers must invest in research and development to produce environmentally friendly alternatives without compromising performance.

Another environmental concern is the disposal and recycling of acrylic-based materials. The non-biodegradable nature of acrylic polymers and co-polymers raises issues related to waste management and sustainability. End-of-life disposal can lead to environmental concerns, and recycling options are limited compared to other materials like plastics. Finding innovative recycling methods and sustainable disposal practices for acrylic-based products is a complex challenge for the industry. Environmental regulations increasingly emphasize the importance of sustainable sourcing and production practices. Acrylic polymers often rely on petrochemical feedstocks, which are subject to price fluctuations and environmental concerns. To address this challenge, manufacturers must explore alternative feedstocks, such as bio-based or renewable sources, to reduce the environmental footprint and dependency on fossil fuels.

Key Market Trends

Sustainability-driven formulations.

Sustainability-driven formulations have emerged as a prominent trend in the global Acrylic Polymers and Acrylic Co-Polymers Market. With increasing environmental consciousness and stringent regulations, industries are shifting towards eco-friendly and sustainable products. Acrylic polymers offer the advantage of flexibility in formulation, enabling the development of low-VOC (volatile organic compound) and environmentally responsible coatings, adhesives, and sealants. Manufacturers are exploring bio-based and renewable feedstocks to reduce the carbon footprint of acrylic polymers. This trend aligns with consumer and industry demands for greener, more sustainable solutions, driving the adoption of acrylic polymers as a key component in eco-conscious formulations across various applications.

Key Market Players

• BASF SE
• The Dow Chemicals Company
• Arkema SA
• Lubrizol Corporation
• Sumitomo Seika Chemicals Co. Ltd
• Anhui Newman Fine Chemicals Co., Ltd.
• Weifang Ruiguang Chemical Co., Ltd.
• Maxwell Additives Pvt. Ltd.
• Ashland Global Specialty Chemicals Inc.
• Gellner Industrial, LLC

Report Scope:

In this report, the Global Acrylic Polymers and Acrylic Co-Polymers Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:

Acrylic Polymers and Acrylic Co-Polymers Market, By Type:

• Polymethyl Methacrylate
• Sodium Polyacrylate
• Polyvinyl Acetate
• Polyacrylamide
• Others

Acrylic Polymers and Acrylic Co-Polymers Market, By Application:

• Paints & Coatings
• Cosmetics
• Cleaning
• Dentistry
• Others

Acrylic Polymers and Acrylic Co-Polymers Market, By Region:

• Asia-Pacific
  • China
  • India
  • Japan
  • Australia
  • South Korea
• Europe
  • France
  • United Kingdom
  • Italy
  • Germany
  • Spain
• North America
  • United States
  • Canada
  • Mexico
• Middle East & Africa
  • South Africa
  • Saudi Arabia
  • UAE
• South America
  • Brazil
  • Argentina
  • Colombia

Competitive Landscape

Company Profiles: Detailed analysis of the major companies present in the Acrylic Polymers and Acrylic Co-Polymers Market.

Available Customizations:

Global Acrylic Polymers and Acrylic Co-Polymers market report with the given market data, TechSci Research offers customizations according to a company's specific needs. The following customization options are available for the report:

Company Information

• Detailed analysis and profiling of additional market players (up to five).